Items where Subject is "Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | D | E | F | G | L | M | P | R | S | T | U | Z
Number of items at this level: 217.

A

Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1997) Impact Fracture Process and Mechanical Properties of Plain Concrete by Means of an Hopkinson Bar Bundle. Journal de Physique IV, 07 (C3). C3-915.

Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1997) Precision Measurements of Vehicle Crashworthiness by Means of a Large Hopkinson Bar. Journal de Physique IV, 07. C3 79-84.

Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1999) Study of the mechanical properties of plain concrete under dynamic loading. Experimental Mechanics, 39 (2). pp. 137-141.

Amado, Rino Michele (2010) Corteggiare i muri. Cascio editore, Lugano.

Amaro, Walter and Broggini, Filippo and Cadoni, Ezio and Diviani, Luca and Pedretti, Andrea (2008) TSCB - Twin Shape Composed Beam. In: Advanced Composite Materials in Bridges and Structures (ACMBS-V), September 22 - 24, 2008, Winnipeg, Manitoba, Canada.

Ambrosi, Christian and Cannata, Massimiliano and Spataro, Alessio and Scapozza, Cristian and Schenker, Filippo and Ceriani, Massimo (2016) Assessing the capability of long range terrestrial laser scanning for monitoring active rockslides. In: 18th Joint Geomorphological Meeting, 27.06.2016, Chambéry, France.

Appogetti, Paolo and Lucisano, Giuseppe and Pedrazzoli, Paolo and Rinaldi, Roberto (2003) SAINT JOSEPH 2000 New Generation Woodworking Machinery and Distributed Control with Vision for Agile Furniture Factory in J.I.T Enterprise. In: ICMEN 2002: 1st International Conference on Manufacturing Engineering.

Asprone, Domenico and Cadoni, Ezio and Prota, Andrea (2009) Experimental Analysis on Tensile Dynamic Behavior of Existing Concrete under High Strain Rates. ACI Structural Journal, 106. pp. 106-113.

Asprone, Domenico and Cadoni, Ezio and Prota, Andrea (2009) Tensile High Strain-Rate Behavior of Reinforcing Steel from an Existing Bridge. ACI Structural Journal, 106 (4). pp. 523-529.

Asprone, Domenico and Cadoni, Ezio and Prota, Andrea and Manfredi, Gaetano (2009) Dynamic behavior of a Mediterranean natural stone under tensile loading. International Journal of Rock Mechanics and Mining Sciences, 46 (3). pp. 514-520.

Asprone, Domenico and Cadoni, Ezio and Prota, Andrea and Manfredi, Gaetano (2009) Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester Composite. ASCE - Journal of Composites for Construction, 13 (6). pp. 558-564.

Asprone, Domenico and Cadoni, Ezio and Prota, Andrea and Manfredi, Gaetano (2009) Tensile dynamic behavior of gfrp subjected to controlled strain rates and aging conditions. In: frprcs9, 13-15 July 2009, Sydney, Australia.

Asprone, Domenico and Iucolano, Fabrizio and Cadoni, Ezio and Prota, Andrea (2011) Analysis of the strain-rate beahavior of a basalt fiber reinforced mortar. Applied Mechanics and Materials, 82. pp. 196-201.

Avai, Antonio and Dal Maso, Giovanni and Pedrazzoli, Paolo and Rovere, Diego (2011) Factory Layout Planner: how to speed up the factory design process using a comfortable environment. In: THE 10TH INTERNATIONAL CONFERENCE ON MODELING AND APPLIED SIMULATION MAS2011.

B

Barbero, Marco and Cattrysse, Erik and Clijsen, Ron and Cescon, Corrado (2014) A novel approach to describe cervical kinematics. In: Swiss Congress for Health Professions , 11-12 Mar 2014, Bern, Switzerland.

Barbero, Marco and Macmillan, Fiona and Coutts, Fiona and Cescon, Corrado and Merletti, Roberto and Gatti, Roberto and Leggero, Vittorio and Cifoletti, Damiana (2012) The spatial relationship between myofascial trigger points and the innervation zone in upper trapezius. In: Proc. of the XIX Congress of the International Society of Electrophysiology and Kinesiology, July 19-21, Brisbane, Australia.

Barbero, Marco and Mafodda, Luca and Cescon, Corrado (2014) The spatial activation of motor units in upper trapezius with myofascial trigger point. In: Swiss Congress for Health Professions, 11-12 Mar 2014, Bern, Switzerland.

Barbero, Marco and Spairani, Lorenzo and Cescon, Corrado and Combi, Federico and Gemelli, Tiziano and Giovanetti, Giuseppe and Magnani, Bruno and D'Antona, Giuseppe (2012) An electromyographic study in vasti muscles during open kinetic and closed kinetic chain submaximal isometric exercises. In: Proc. of the XIX Congress of the International Society of Electrophysiology and Kinesiology.

Barni, Andrea Francesco and Corti, Donatella and Pedrazzoli, Paolo and Rovere, Diego and Lucisano, Giuseppe (2017) Mini-factories for close-to-customer manufacturing of customized furniture: from concept to real demo. P. Procedia manufacturing. (In Press)

Bernasconi, Angelo and Cadoni, Ezio and Chianese, Domenico and Kaehr, Paolo and Pahud, Daniel and Salvadori, Dario (2005) Durability of flat roofs: practical experience on service life and consequences on the maintenance strategy. In: 10DBMC, 17-20 April 2005, Lyon, France.

Bocca, Pietro and Cadoni, Ezio (1995) Analisi del comportamento di ancoraggi nel calcestruzzo sollecitati a trazione e soggetti a fatica. Industria delle Costruzioni, 281. pp. 66-72.

Bocca, Pietro and Cadoni, Ezio (1997) Comportamento di ancoraggi nel calcestruzzo sotto carichi ripetuti. Industria Italiana del Cemento, 720. pp. 324-329.

Bottin, Andrea and Cescon, Corrado and Farina, Dario and Gazzoni, Marco and Merletti, Roberto and Merlo, Andrea and Rainoldi, Alberto (2001) Advances in surface EMG signal detection and processing. In: Proc. of the ESA/ASI Congress, October 2001, Torino, Italy.

Bottin, Andrea and Cescon, Corrado and Farina, Dario and Merletti, Roberto and Merlo, Andrea and Rainoldi, Alberto (2001) Tecniche avanzate per il prelievo, la elaborazione e la interpretazione di segnali elettrici muscolari. In: Workshop Nazionale: La scienza e la Tecnologia sulla Stazione Spaziale Internazionale (ISS), Centro ALTEC, 16-18 May 2001, Torino, Italy.

Botturi, Luca and Negrini, Lucio (2016) Il pensiero computazionale e la scuola dell’obbligo. Emmeciquadro, 60. ISSN 2240-0389

Boer, Claudio and Ambrosi, Edgardo and Furlan, Andrea and Liotta, Giacomo and Pedrazzoli, Paolo and Sacco, Marco (2003) General Emulator Architecture in Modular Plant Architecture Environment. In: CIRP, 2nd International Conference on Reconfigurable Manufacturing.

Boer, Claudio and Canetta, Luca and Pedrazzoli, Paolo and Redaelli, Claudia (2013) Academic-industrial international cooperations for engineering education. Journal of Intelligent Manufacturing, 24 (3). pp. 433-439. ISSN 0956-5515

Boer, Claudio and Pedrazzoli, Paolo and Rinaldi, Roberto and De Pascale, G and Larizza, P and Chiabra, P (2003) Integrated flexible design and assembly system. Journal of Engineering Manufacture, 217 (6). pp. 843-848. ISSN 0954-4054

Boer, Claudio and Pedrazzoli, Paolo and Sacco, Marco and Rinaldi, Roberto and De Pascale, G and Avai, Antonio (2001) Integrated computer aided design for assembly systems. CIRP Annals-Manufacturing Technology, 50 (1). pp. 17-20. ISSN 0007-8506

Bragov, Anatoly M. and Cadoni, Ezio and Konstantinov, Alexander and Lomunov, Andrey (2011) Tension and compression behavior of pre-stressed steel strands at high strain rate. Applied Mechanics and Materials, 82. pp. 154-159. ISSN 1662-7482

C

Cadoni, Ezio (2011) Assessment of the structural materials under high stain-rate in tension. In: Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering. University of Malta, pp. 327-338.

Cadoni, Ezio (2010) Dynamic Characterization of Orthogneiss Rock Subjected to Intermediate and High Strain Rate in Tension. Rock Mechanics and Rock Engineering, 43 (6). pp. 667-676.

Cadoni, Ezio (2013) Fracture behaviour of concrete at high strain rate. In: Fracture Mechanics of Concrete and Concrete Structures UNSPECIFIED, 10-14 March, 2013, Toledo (Spain).

Cadoni, Ezio (2016) Mechanical characterization of high value alloys and metal-matrix composites (with and without CRM) under high strain rates and high temperature. In: COST CRM_EXTREME - Innovation Towards Technology for Extreme Conditions Industry, 5.10.2016-7.10.2016, Burgos, Spain.

Cadoni, Ezio and Albertini, Carlo (2011) Modified Hopkinson Bar Technologies Applied to the High Strain Rate of Rocks. In: Zhou, Yingxin and Zhao, Jian, (eds.) Advances in Rock Dynamics and Applications. Taylor & Francis, pp. 79-104. ISBN 978-0-415-61351-4

Cadoni, Ezio and Albertini, Carlo and Dotta, Matteo and Forni, Daniele and Giorgetti, Paolo and Riganti, Gianmario (2009) Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In: Rock fragmentation by blasting. Taylor & Francis Group, Granada, pp. 35-41. ISBN 978-0-415-48296-7

Cadoni, Ezio and Albertini, Carlo and Forni, Daniele (2008) Impact behaviour of materials: a tool for the de-sign of rockfall protective shelters. In: Interdisciplinary Workshop on Rock Fall Protection, June 23-25, 2008, Morschach, Switzerland.

Cadoni, Ezio and Albertini, Carlo and Solomos, George (2006) Analysis of the concrete behaviour in tension at high strain-rate by a modified Hopkinson bar in support of impact resistant structural design. Journal de Physique IV, 134. pp. 647-652.

Cadoni, Ezio and Amaro, Walter and Dotta, Matteo and Albertini, Carlo and Giorgetti, Paolo (2006) DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In: Structural Concrete in Switzerland. FIB-CH, pp. 35-38.

Cadoni, Ezio and Antonietti, Samuel and Dotta, Matteo and Forni, Daniele (2011) Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, 59 (3). pp. 197-210.

Cadoni, Ezio and Asprone, Domenico and Dotta, Matteo and Forni, Daniele and Prota, Andrea and Manfredi, Gaetano (2009) Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In: Structures under extreme loading. National Defence Academy - Japan.

Cadoni, Ezio and Asprone, Domenico and Prota, Andrea (2007) Dynamic behavior of concrete and steel belonging to the Tenza bridge. In: Concrete under severe conditions. ACTES DES JOURNÉES SCIENTIFIQUES DU LCPC, pp. 1341-1348.

Cadoni, Ezio and Asprone, Domenico and Prota, Andrea (2007) High strain-rate testing analysis of concrete and steel for the assessment of the Tenza Bridge under blast loading. In: New trends in fractures mechanics of concrete. Balkema, pp. 627-635. ISBN 978-0-415-44065-3

Cadoni, Ezio and Asprone, Domenico and Prota, Andrea (2007) Structural assessment of the Tenza Bridge under extreme loads: the role of the material characterization at high strain-rate. In: Performance, protection & strengthening of structures under extreme loading. UBC.

Cadoni, Ezio and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2009) Criteria for optimized design of demolition of a bridge: the Tenza bridge. In: Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering. University of Malta, pp. 211-216. ISBN 978-973-638-428-8

Cadoni, Ezio and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2009) Dynamic tensile behavior of yellow tuff. In: Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, pp. 1359-1365. ISBN 978-2-7598-0473-3

Cadoni, Ezio and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2009) Material characterization at high strain-rate to design a controlled demolition of a bridge. In: proceeding IF CRASC’09, 1st Congress on forensic engineering, 4th Congress on Collapses, Reliability and Retrofit of Structures 4th Congress on Collapses, Reliability and Retrofit of Structures, 2-4/12/2009, Napoli.

Cadoni, Ezio and Bragov, Anatoly M. and Caverzan, Alessio and di Prisco, Marco and Konstantinov, Alexander and Lomunov, Andrey (2010) Mechanical Response of HPFRCC in Tension and Compression at High Strain Rate and High Temperature. Engineering Transactions, 58 (3). pp. 95-107.

Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, 26. 01021.

Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey and Ripamonti, Antonio (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, 59 (2). pp. 101-117.

Cadoni, Ezio and Cangiano, Stefano and Frigeri, Giuliano and Plizzari, Giovanni A. and Teruzzi, Tiziano (2005) Durability and fracture behaviour of steel fibre reinforced concrete. In: Construction Materials: Performances, Innovations and Structural implication. Taylor & Francis. ISBN 0-7277-3401-6

Cadoni, Ezio and Cangiano, Stefano and Frigeri, Giuliano and Plizzari, Giovanni A. and Teruzzi, Tiziano (2005) On durability of Steel Fibre Reinforced Concrete. In: Construction Materials: Performances, Innovations and Structural implication. Thomas Telford, pp. 477-486. ISBN 0-7277-3401-6

Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2010) Behaviour of High Performance Fibre Reinforced Cementitious Composites under high dynamic loading and fire for safe tunnels. In: Urban Habitat Constructions under Catastrophic Events. Taylor & Francis Group.

Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2008) Dynamic behaviour of HPFR cementitious composites. In: Ultra High Performance Concrete. Structural Materials and Engineering Series, 10 . Kassel University Press, pp. 743-750. ISBN 978-3-89958-376-2

Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2012) Dynamic behaviour of HPFRCC in tension. EPJ Web of Conferences, 26. 01014.

Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2009) Dynamic characterization of advanced cementitious composites in design and construction of safe tunnel. In: Structures under extreme loading. National Defence Academy - Japan. ISBN 9784990480608

Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2010) On the influence of high temperature on the dynamic behaviour of high performance fibre reinforced cementitious composites. In: Concrete under severe conditions - Environment and Loading. Taylor & Francis, pp. 1331-1338. ISBN 9780415593168

Cadoni, Ezio and Colombo, Paolo and Terminio, Andrea (1999) Il controllo di qualità del calcestruzzo strutturale garanzia della durabilità. Industria Italiana del Cemento.

Cadoni, Ezio and D'Aiuto, Fabio and Albertini, Carlo (2009) Dynamic behaviour of Advanced High Strength Steels used in the automobile structures. In: Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, pp. 135-141. ISBN 978-2-7598-0472-6

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo and D'Aiuto, Fabio and Federici, Claudio and Maggi, Stefano (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In: Impact Loading of Lightweight Structures Impact Loading of Lightweight Structures, 17-19 June 2008, Trondheim, Norway.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2010) Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In: Structural Concrete in Switzerland. FIB-CH, pp. 28-31.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. In: Failure and damage mechanisms of armour materials, 26 November 2010, Madrid.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, 82. pp. 124-129.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano and Kaufmann, Hanspeter (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, 26. 05004.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Caverzan, Alessio and di Prisco, Marco (2010) Advanced cementitious composites in the design and construction of safe tunnels. In: Structural Concrete in Switzerland. FIB-CH, pp. 12-15.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, 2. pp. 986-993. ISSN 2452-3216

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Meda, Alberto and Plizzari, Giovanni A. (2009) Rate Effects of High Performance Fibre Reinforced Cementitius Composite under tensile loading. In: Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, pp. 809-815. ISBN 978-2-7598-0472-6

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Kaufmann, Hanspeter (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. In: UNSPECIFIED, 22-24 April, 2013, Tel Aviv.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2015) Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate. EPJ Web of Conferences, 94. 01022. ISSN 2101-6275

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, 414 (3). 360 - 366.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spätig, Philippe (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. In: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications and 1st International Conference on Fusion Energy Materials Science, Rosemberg.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, 82. pp. 86-91.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Albertini, Carlo (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, 49 (8). pp. 657-666.

Cadoni, Ezio and Dotta, Matteo and Meda, Alberto and Plizzari, Giovanni A. (2007) Analysis of Fiber Reinforced Concrete under impact loading. In: Performance, protection & strengthening of structures under extreme loading. UBC. ISBN 9780888658166

Cadoni, Ezio and Dotta, Matteo and Meda, Alberto and Plizzari, Giovanni A. (2007) Behaviour of polypropylene Fibre Reinforced Concrete under static and impact tensile loading. In: Concrete under severe conditions. Actes des journées scientifiques du LCPC, Parigi, pp. 1267-1274.

Cadoni, Ezio and Fenu, Luigi and Forni, Daniele (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, 35. 399 - 407.

Cadoni, Ezio and Forni, Daniele (2016) Experimental analysis of the UHPFRCs behavior under tension at high stress rate. The European Physical Journal Special Topics, 225. pp. 1-12.

Cadoni, Ezio and Forni, Daniele (2010) Mechanical behaviour of Basalt Fiber Reinforced Cementitius Composite under quasi static, medium and high strain rate. Technical Report UNSPECIFIED

Cadoni, Ezio and Forni, Daniele and Botturi, Luca (2008) Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers. TechTrends, Volume (5). pp. 17-21. ISSN 1559-7075

Cadoni, Ezio and Kaufmann, Hanspeter (2012) Opportunities and Challenges of Light-Weight Armour: Failure Mechanisms, Materials, Experiments and Modeling. In: Cadoni, Ezio, (ed.) SUPSI. ISBN 9788875951207

Cadoni, Ezio and Labibes, Kamel and Albertini, Carlo and Berra, Mario and Giangrasso, Marco (2001) Strain-rate effect on the tensile behaviour of concrete at different relative humidity levels. Materials and Structures, 34 (1). pp. 21-26.

Cadoni, Ezio and Labibes, Kamel and Berra, Mario and Giangrasso, Carlo (2000) High-strain-rate tensile behaviour of concrete. Magazine of Concrete Research, 52 (5). pp. 365-370. ISSN 0024-9831

Cadoni, Ezio and Labibes, Kamel and Berra, Mario and Giangrasso, Marco and Albertini, Carlo (2001) Influence of Aggregate Size on Strain-Rate Tensile Behavior of Concrete. ACI Materials Journal, 98 (3). pp. 220-223.

Cadoni, Ezio and Meda, Alberto and Plizzari, Giovanni A. (2008) Rate sensitivity of HPFRCC under tensile loading: from quasi-static to high strain rates. In: Fibre Reinforced Concrete: Design and Applications. Rilem, India, pp. 441-450. ISBN 978-2-35158-064-6

Cadoni, Ezio and Meda, Alberto and Plizzari, Giovanni A. (2009) Tensile behaviour of FRC under high strain-rate. Materials and Structures, 42 (9). pp. 1283-1294.

Cadoni, Ezio and Singh, Nilamber Kumar and Forni, Daniele and Singha, Maloy Kumar and Gupta, Narinder Kumar (2016) Strain rate effects on the mechanical behavior of two Dual Phase steels in tension. The European Physical Journal Special Topics, 225. pp. 1-12.

Cadoni, Ezio and Singh, Nilamber Kumar and Singha, Maloy Kumar and Gupta, Narinder Kumar (2011) High strain rate characterization of an advanced high strength steel. In: 3rd International Conference on Impact Loading of Lightweight Structures. , June 28-July 1, 2011, Valencienne.

Cadoni, Ezio and Singh, Nilamber Kumar and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Strain rate behaviour of multi-phase and complex-phase steels for automotive applications. EPJ Web of Conferences, 26. 05003.

Cadoni, Ezio and Solomos, George and Albertini, Carlo (2009) Mechanical characterisation of concrete in tension and compression at high strain rate using a modified Hopkinson bar. Magazine of Concrete Research, 61 (3). pp. 221-230. ISSN 0024-9831

Cadoni, Ezio and Solomos, George and Berra, Mario and Albertini, Carlo (2005) High strain-rate behaviour of plain concrete subjected to tensile and compressive loading. In: Construction Materials: Performances, Innovations and Structural implication ConMat-05, 3rd Intern. Conf., 22-24 August, 2005, Vancouver, Canada.

Cadoni, Ezio and Teruzzi, Tiziano and Muttoni, Aurelio and Suter, René and Brühwiler, Eugen (2004) FRC in Switzerland: research, applications and perspectives. In: FRC: From theory to practice. Starlink, pp. 157-168.

Cadoni, Ezio and di Prisco, Marco (2011) Performance, Protection and Strengthening of Structures under Extreme Loading. Applied Mechanics and Materials, 82 . Trans Tech Publication, p. 900. ISBN 978-3-03785-217-0

Carneiro, Luis Maia and Jasinski, Thomas and Zolghadri, Marc and Pedrazzoli, Paolo (2013) Intelligent Non-hierarchical Manufacturing Networks. John Wiley & Sons. ISBN 1848214812

Castelletti, Andrea and Cellina, Francesca and Soncini-Sessa, Rodolfo and Weber, Enrico (2006) Comprehensive testing and application of the PIP procedure: the Verbano project case study. In: Castelletti, Andrea and Soncini-Sessa, Rodolfo, (eds.) Topics on System Analysis and Integrated Water Resources Management (IWRM). Elsevier Science Ltd., Amsterdam. ISBN 9780080449678

Castri, Roberta and Wemyss, Devon and Cellina, Francesca and De Luca, Vanessa and Frick, Vivian and Lobsiger-Kaegi, Evelyn and Galbani Bianchi, Pamela and Carabias, Vicente (2016) Triggering Electricity-Saving Through Smart Meters: Play, Learn And Interact Using Gamification And Social Comparison. In: Proceedings of the 1st ever Energy-Feedback Symposium - Teddinet 1st Energy-Feedback Symposium “Feedback in energy demand reduction: Examining evidence and exploring opportunities”, 04.07.2016-05.07.2016, Edinburgh, United Kingdom.

Caverzan, Alessio and Cadoni, Ezio and Colombo, Matteo and di Prisco, Marco (2010) Comportamento dinamico ed alle alte temperature di compositi cementizi fibrorinforzati ad alte prestazioni. In: Proceedings of 18° Congress C.T.E. 18° Congresso C.T.E., Brescia.

Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2011) Dynamic tensile behaviour of Self Compacting Steel Fibre Reinforced Concrete. Applied Mechanics and Materials, 82. pp. 220-225.

Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2013) Dynamic tensile behaviour of high performance fibre reinforced cementitious composites after high temperature exposure. Mechanics of Materials, 59. pp. 87-109.

Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2012) Tensile behaviour of high performance fibre-reinforced cementitious composites at high strain rates. International Journal of Impact Engineering, 45. 28 - 38.

Caverzan, Alessio and di Prisco, Marco and Cadoni, Ezio (2015) Dynamic behaviour of HPFRCC: The influence of fibres dispersion. EPJ Web of Conferences, 94. 01064. ISSN 2101-6275

Cellina, Francesca and Kovacs, Nikolett and Rudel, Roman and Raubal, Martin and Boulouchos, Konstantinos and Hirschberg, Stefan and Hoppe, Maria (2017) Towards an Energy Efficient and Climate Compatible Future Swiss Transportation System. Working Paper ETHZ , Zurich.

Cellina, Francesca and Rudel, Roman and Bettini, Albedo (2015) Potentials and implications of the transition to electric mobility. Insights from a living lab in Southern Switzerland. In: 2015 SCCER Mobility Annual Conference, 26-27 August 2015, Zurich, ETH.

Cellina, Francesca and Rudel, Roman and De Luca, Vanessa and Rizzoli, Andrea Emilio and Botta, Massimo and Raubal, Martin and Bucher, Dominik and Weiser, Paul (2016) Eco-feedback and gamification elements for sustainability: the GoEco! living lab experiment. In: Transportation Research Procedia 6th European Transport Research Conference, 18.04.2016-21.04.2016, Warsaw, Poland.

Ceruti, Ilario Francesco and Dal Maso, Giovanni and Ghielmini, Giorgio and Pedrazzoli, Paolo and Rovere, Diego (2010) Factory Layout Planner. In: UNSPECIFIED.

Ceruti, Ilario Francesco and Dal Maso, Giovanni and Rovere, Diego and Pedrazzoli, Paolo and Boer, Claudio (2008) Real Time Collision Detection For Complex Simulations Based On Hybrid Multi Resolution Approximation Of CAD Models. In: MAS 2008 (International Workshop on Modeling & Applied Simulation).

Cescon, Corrado (2006) Automatic location of muscle innervation zones from multi-channel surface EMG signals. In: Proceedings of the IEEE International Workshop on Medical Measurement and Applications. MeMeA, 20-21 Apr 2006, Benevento, Italy.

Cescon, Corrado (2005) Development of advanced techniques for the detection and processing of mechanomyographic (MMG) signals. In: Engineering and Medical Care, Politecnico di Torino, May 2005, Torino, Italy.

Cescon, Corrado and Gobbo, Massimiliano and Farina, Dario and Gazzoni, Marco and Merletti, Roberto and Orizio, Claudio (2004) Single motor unit contribution to surface mechanomyogram investigated in two hand muscles. In: Proc. of the XV Congress of the International Society of Electrophysiology and Kinesiology, 18-21 June 2004, Boston, MA, USA.

Cescon, Corrado and Madeleine, Pascal and Graven-Nielsen, Thomas and Merletti, Roberto and Farina, Dario (2006) Two-dimensional spatial distribution of surface mechanomyography response to single motor unit activity. In: Proc. of the XVI Congress of the International Society of Electrophysiology and Kinesiology, 29 Jun - 1 Jul 2006, Torino, Italy.

Cescon, Corrado and Nannucci, Lorenzo and Orizio, Claudio (2002) A prototype of hybrid probe for surface EMG and MMG joint recordings. In: Proc. of the XIV Congress of the International Society of Electrophysiology and Kinesiology, 22-25 June 2002, Vienna, Austria.

Cescon, Corrado and Nannucci, Lorenzo and Orizio, Claudio and Farina, Dario and Gazzoni, Marco (2002) Single motor unit mechanomyogram: a spike-triggered averaging approach. In: Proc. of the XIV Congress of the International Society of Electrophysiology and Kinesiology, 22-25 June 2002, Vienna, Austria.

Cescon, Corrado and Pozzo, Marco and Venturi, Silvia and Bonfiglioli, Roberta and Merletti, Roberto and Violante, Francesco (2004) Assessment of Fatigue in Low Back Muscles of Elderly Nurses. In: Proc. of the XV Congress of the International Society of Electrophysiology and Kinesiology, 18-21 June 2004, Boston, MA, USA.

Cescon, Corrado and Pozzo, Marco and Venturi, Silvia and Merletti, Roberto and Bonfiglioli, Roberta and Violante, Francesco (2004) Neuromuscular assessment of fatigue of low back muscles in elderly nurses. In: Proc. of the International Symposium on Neuromuscular Assessment in the Elderly Worker, 20-21 Feb 2004, Torino, Italy.

Cescon, Corrado and Raimondi, Eleonora Ester and Začesta, Vita and Drusany-Starič, Kristina and Martsidis, Konstantinos and Merletti, Roberto (2014) Characterization of the motor units of the external anal sphincter in pregnant women with multichannel surface EMG. International urogynecology journal, 25 (8). pp. 1097-1103. ISSN 0937-3462 (In Press)

Cescon, Corrado and Riva, Diego and Raimondi, Eleonora Ester (2012) TASI-2 Project - 2009-2011. In: International Genoa Incontinence, Jan 2012, Genova, Italy.

Cescon, Corrado and Riva, Diego and Začesta, Vita and Drusany-Starič, Kristina and Martsidis, Konstantinos and Protsepko, Oleksander and Baesslererle, Kaven and Merletti, Roberto (2014) Effect of vaginal delivery on the external anal sphincter muscle innervation pattern evaluated by multichannel surface EMG: results of the multicentre study TASI-2. International urogynecology journal, 25 (11). pp. 1491-1499. ISSN 0937-3462

Chatzipanagi, Anatoli and Frontini, Francesco and Dittmann, Sebastian and Nagel, Kim and Pola, Ivano and Fanni, Lorenzo and Binder, Bruno and Stephan, Carl and Wakili, Karim (2011) Evaluation of 1 Year Monitoring Results of a Testing Stand for Building Integrated PV Elements. In: 26th EU PVSEC.

Confalonieri, Matteo and Barni, Andrea Francesco and Cinus, Marco and Valente, Anna (2016) An AI based decision support system for preventive maintenance and production optimization in energy intensive manufacturing plants. 2015 IEEE International Conference on Engineering, Technology and Innovation/ International Technology Management Conference, ICE/ITMC 2015.

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In: Proceedings of XI Convegno Nazionale AIMAT Proceedings of XI Convegno Nazionale AIMAT, 16 – 19 settembre 2012, Gaeta (LT) .

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, 82. pp. 190-195.

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Performance of multi-scale fiber reinforced cement composites at high strain rate. In: The new boundaries of structural concrete UNSPECIFIED, 15-16 Settembre 2011, Ancona.

D

D'Aiuto, Fabio and De Caro, Daniele and Federici, Claudio and Tedesco, Michele M. and Ziggiotti, Alessandro and Cadoni, Ezio (2015) Application of the dynamic characterization of metals in automotive industry. EPJ Web of Conferences, 94. 05002. ISSN 2101-6275

D'Alessandro, Delfo and Pertici, Gianni and Moscato, Stefania and Metelli, Maria Rita and Danti, Sabrina and Nesti, Claudia and Berrettini, Stefano and Petrini, Mario and Danti, Serena (2014) Processing large-diameter poly(L-lactic acid) microfiber mesh/mesenchymal stromal cell construct via resin embedding: an efficient histologic method. Biomedical Materials, 9 (4). ISSN 1748-605X

D'Amico, Giuseppe Claudio and Ortona, Alberto and Biamino, Sara and Fino, Paolo and Badini, Claudio and D'Angelo, Claudio (2014) Oxidation Behavior at 1600°C of Si-SiC-ZrB2 Composites Produced by Si Reactive Infiltration. Advanced Engineering Materials, 16 (2). pp. 176-183. ISSN 1527-2648

Danti, Serena and Ciofani, Gianni and Pertici, Gianni and Moscato, Stefania and D'Alessandro, Delfo and Ciabatti, Elena and Chiellini, Federica and D'Acunto, Mario and Mattoli, Virgilio and Berrettini, Stefano (2014) Boron nitride nanotube-functionalised myoblast/microfibre constructs: a nanotech-assisted tissue-engineered platform for muscle stimulation. Journal of Tissue Engineering and Regenerative Medicine, 9 (7). pp. 847-851. ISSN 1932-6254

De Matteis, Gianfranco and Cadoni, Ezio and Asprone, Domenico (2010) Analysis of behaviour of constructions under impact and explosions: approaches for structural analysis, from material modeling to structural response. In: Urban Habitat Constructions under Catastrophic Events. Taylor & Francis Group, pp. 161-178.

Del Furia, Luca and Rizzoli, Andrea Emilio and Arditi, Roger (1995) Lakemaker: A general object-oriented software tool for modelling the eutrophication process in lakes. Environmental Software, 10 (1). pp. 43-64.

Dos Santos Barrettino, Rosane Moura (2015) Development of a Novel Electrically Conductive Flame Retardant Bio-based Thermoplastic Polyurethane. PhD thesis, Politecno Di Torino, Italy.

Dos Santos Barrettino, Rosane Moura and Floris, Moreno and Banfi, Michele and Oberrauch, Ermanno and Marchizza, Matteo and Tognola, Guido and Malucelli, Giulio and Castrovinci Cercatore, Andrea (2015) An online acquisition method for monitoring the surface growth of flame retardant protective layers. In: Fire and Materials, UNSPECIFIED.

Dos Santos Barrettino, Rosane Moura and Spaggiari, Marco and Floris, Moreno and Banfi, Michele and Oberrauch, Ermanno and Malucelli, Giulio and Tognola, Guido and Maiano, Mauro and Castrovinci Cercatore, Andrea (2015) Monitoring the surface growth of intumescent materials by means of a novel 2D and 3D apparatus. In: 1st Asia-Oceania Symposium on Fire Safety Materials Science and Engineering, 09-11 Oct 2015, Suzhou, China.

di Prisco, Marco and Beltrami, Carlo and Bonalumi, Pamela and Cadoni, Ezio and Caverzan, Alessio and Colombo, Matteo and Ferrara, Liberato and Martinelli, Paolo (2013) HPFRC tunnel segments to mitigate the risk of exceptional loads. In: Engineering a Concrete Future: Technology, Modeling & Construction UNSPECIFIED, 22-24 April, 2013, Tel Aviv.

E

El-Chaar, Jamal and Boer, Claudio and Pedrazzoli, Paolo and Mazzola, Stefano and Dal Maso, Giovanni (2011) Interactive 3D virtual environments for industrial operation training and maintenance. In: Reliability, Maintainability and Safety (ICRMS), 2011 9th International Conference on.

Essendrop, Morten and Hjortskov, Nis and Søgaard, Karen and Cescon, Corrado and Fallentin, Nils (2004) Analysis of fatigue in the erector spinae muscle during sustained isometric back extension by means of sEMG. In: Proc. of the XV Congress of the International Society of Electrophysiology and Kinesiology, 18-21 June 2004, Boston, MA, USA.

Evstifeev, Alexey and Cadoni, Ezio and Petrov, Yuri (2012) Incubation time approach to rock dynamic strength characterization. EPJ Web of Conferences, 26. 01041.

F

Farina, Dario and Cescon, Corrado (2001) Concentric ring electrodes for non-invasive detection of single motor unit activity. In: Proc. of the 2nd PROCID Symposium, March 2001, Goteborg, Sweden.

Fenu, Luigi and Forni, Daniele and Cadoni, Ezio (2016) Dynamic behaviour of cement mortars reinforced with glass and basalt fibres. Composites Part B: Engineering, 92 (5). pp. 142-150.

Flores Pineda, Myrna and Canetta, Luca and Castrovinci Cercatore, Andrea and Pedrazzoli, Paolo and Longhi, Renzo and Boer, Claudio (2008) Towards an integrated framework for sustainable innovation. International Journal of Sustainable Engineering, 1 (4). pp. 278-286. ISSN 1939-7038

Fornari, Davide (2007) Design and innovation of ambulances. DIID Disegno Industriale Industrial Design (27). pp. 4-6. ISSN 15948528

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) The effect of high strain rate on tensile properties of S355 steel at high temperature. In: Zingoni, Alphose, (ed.) Taylor & Francis Group, London. ISBN 978-1-138-02927-9

Frontini, Francesco and Kuhn, Tilmann E. and Herkel, Sebastian and Strachan, Paul and Kokogiannakis, Georgios (2009) Implementation of a new bi-directional solar modelling method for complex facades within the ESP-r building simulation program and its application. In: UNSPECIFIED.

Frontini, Francesco and Matteo, Brasca and Niccolo, Aste (2006) Design of prismatic panel for daylight control applied to a museum. In: UNSPECIFIED.

G

Gaetano, Antonio and Zavattoni, Simone and Barbato, Maurizio and Good, Philipp and Ambrosetti, Gianluca and Pedretti, Andrea (2015) Design optimization of a novel receiving cavity for Concentrated Solar Power applications by means of 3D CFD simulations. Energy Procedia, 69. pp. 379-387. ISSN 18766102

Geissbühler, Lukas and Zavattoni, Simone and Barbato, Maurizio and Zanganeh, Giw and Haselbacher, Andreas and Steinfeld, Aldo (2015) Experimental and Numerical Investigation of Combined Sensible/Latent Thermal Energy Storage for High-Temperature Applications. CHIMIA International Journal for Chemistry, 69 (12). pp. 799-803.

Gerretsen, Reza and Cescon, Corrado and Farina, Dario and Wijkstra, Hessel and Heesakkers, John (2003) Detection of Innervation zones and IZ distribution in the urethral sphincter through circumferential surface EMG. In: XXXIII Annual meeting of the International Continence Society, 5-9 Oct 2003, Florence, Italy.

Ghielmini, Giorgio and Pedrazzoli, Paolo and Rovere, Diego and Terkaj, Walter and Boer, Claudio and Dal Maso, Giovanni and Milella, Ferdinando and Sacco, Marco (2013) Virtual Factory Manager for semantic data handling. CIRP Journal of Manufacturing Science and Technology, 6 (4). pp. 281-291. ISSN 1755-5817

Ghielmini, Giorgio and Pedrazzoli, Paolo and Rovere, Diego and Terkaj, Walter and Boer, Claudio and Dal Maso, Giovanni and Milella, Ferdinando and Sacco, Marco (2011) Virtual factory manager of semantic data. In: 7th International Conference on Digital Enterprise Technology 7th International Conference on Digital Enterprise Technology, 28.09.2011-30.09.2011, Athens, Greece.

Grazka, Michal and Janiszewski, Jacek and Kruszka, Leopold and Cadoni, Ezio and Forni, Daniele and Riganti, Gianmario (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, 566. pp. 97-103. ISSN 1660-9336

L

Landolfi, Giuseppe and Alge, Marino and Cinus, Marco and Menato, Silvia and Canetta, Luca and Pedrazzoli, Paolo (2014) Human-centric data model and data integration platform enabling personalized product service systems for healthcare. In: Engineering, Technology and Innovation (ICE), 2014 International ICE Conference on.

Latella, Claudia and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2015) Influence of strain rate on the mechanical behaviour in tension of bovine cortical bone. EPJ Web of Conferences, 94. 03001. ISSN 2101-6275

Li, Hongxin and Fan, Yushun and Dunne, Catherine and Pedrazzoli, Paolo (2005) Integration of business processes in Web-based collaborative product development. International Journal of Computer Integrated Manufacturing, 18 (6). pp. 452-462. ISSN 1362-3052

Liao, Zhi and Sacco, Marco and Boer, Claudio and Ambrosi, Edgardo and Pedrazzoli, Paolo (2003) An Empirical Study of Virtual Factory Development. In: 2nd CENNET Workshop.

Lifa, Imad and Heimgartner, Michel and Schlegel, F and Ambrosi, Christian and Scapozza, Cristian and Luescher, Manuel and Spataro, Alessio and Wildberger, Thomas and Bosshard, Andreas and Kuster, D (2016) Research Project: Sustainable Erosion Controll Using Wood Wool. Environmental Connection, 10 (3). pp. 16-17.

Lopez, Mario and Rinaldi, Roberto and Boer, Claudio and Castellani, Roberto and Pedrazzoli, Paolo (2004) A new approach to maintenance in the manufacturing sector. In: Information Control Problems In Manufacturing UNSPECIFIED.

Luccioni, Bibiana and Isla, Facundo and Forni, Daniele and Cadoni, Ezio (2016) Modelado de Hormigones de Ultra Altas Prestaciones Reforzados con Fibras bajo Altas Velocidades de Deformación. Mecánica Computacional, XXXIV. pp. 199-223. ISSN 1666-6070

M

Madeleine, Pascal and Cescon, Corrado and Farina, Dario (2006) Mechanomyographic topographical maps in isometric contractions. In: Proc. of the XVI Congress of the International Society of Electrophysiology and Kinesiology, 29 Jun - 1 Jul 2006, Torino, Italy.

Mancini, Fausto and Lopez, Mario and Rinaldi, Roberto and Boer, Claudio and Pedrazzoli, Paolo and Beccati, Fabrizio (2004) A new approach to programming flexibility for cnc machines. an example of application in woodworking machining. In: 37th CIRP Int.l Seminar on Manufacturing Systems (ISMS 2004).

Martsidis, Konstantinos and Marongiu, Donatella and Cescon, Corrado and Mais, Valerio and Melis, Gian Benedetto and Paoletti, Anna Maria (2011) Un nuovo metodo di valutazione oggettiva non invasiva dell'incontinenza anale post-partum. Fattori di rischio, fisiopatologia, prevenzione: risultati preliminari. In: XXI Congresso Nazionale AIUG, Urogynaecologia International Journal, 6-8 Nov 2011, Torino, Italy.

Menato, Silvia and Carimati, Stefano and Montini, Elias and Innocenti, Patrick and Canetta, Luca and Sorlini, Marzio (2017) Challenges for the adoption of industrial symbiosis approaches within industrial agglomerations. In: ICE 2017, June 2017, Madeira (P). (Submitted)

Mende, Sandra and Frontini, Francesco and Wienold, Jan (2011) Comfort and building performance analysis of transparent building integrated silicon photovoltaic. In: Driving better design through simulation.

Mesin, Luca and Cescon, Corrado and Gazzoni, Marco and Merletti, Roberto and Rainoldi, Alberto (2009) A bi-dimensional index for the selective assessment of myoelectric manifestations of peripheral and central muscle fatigue. Journal of Electromyography and Kinesiology, 19 (5). pp. 851-863. ISSN 1050-6411

Mirone, Giuseppe and Barbagallo, Raffaele and Cadoni, Ezio (2017) Tensile Test of a HSLA Steel at High Strain Rates with Two Different SHTB Facilities. Procedia Engineering, 197. pp. 89-98.

P

Pampuri, Luca and Cereghetti, Nerio and Strepparava, Davide and Caputo, Paola (2016) Analysis of the electricity consumptions: A first step to develop a district cooling system. Sustainable Cities and Society, 23. pp. 23-36. ISSN 2210-6707

Pedrazzoli, Paolo (2009) Design Of customeR dRiven shOes and multi-siTe factory--DOROTHY. In: UNSPECIFIED.

Pedrazzoli, Paolo and Boer, Claudio (2005) Knowledge based services for traditional manufacturing sectors provided by a network of high tech smes. In: UNSPECIFIED.

Pedrazzoli, Paolo and Cocco, Matteo and Cerri, Daniele and Taisch, Marco and Corti, Donatella and Dal Lago, Marco and Terzi, Sergio (2014) Simulation and forecasting technologies (S&FT): Gaps and challenges for their future role in manufacturing. In: Engineering, Technology and Innovation (ICE), 2014 International ICE Conference on.

Pedrazzoli, Paolo and Mancini, Fausto and Sacco, Marco and Boer, Claudio (2003) Request and Navigation Component for DRAGON Portal. In: 2nd CENNET Workshop.

Pedrazzoli, Paolo and Rinaldi, Roberto and Boer, Claudio (2001) A rule based approach to the gripper selection issue for the assembly process. In: Assembly and Task Planning, 2001, Proceedings of the IEEE International Symposium on.

Pedrazzoli, Paolo and Rovere, Diego and Constantinescu, Carmen and Bathelt, Jens and Pappas, Menelaos and Dépincé, George and Boer, Claudio (2007) High value adding VR tools for networked customer-driven factory. In: 4th International Conference on Digital Enterprise Technology 4th International Conference on Digital Enterprise Technology, 19.09.2007-21.09.2007, Bath, United Kingdom.

Pedrazzoli, Paolo and Sacco, Marco and Jönsson , Claudio R (2007) Virtual Factory Framework: key enabler for future manufacturing. In: Digital Enterprise Technology. Springer, pp. 83-90. ISBN 978-0-387-49863-8

Portioli, Francesco and D'Aniello, Mario and Cadoni, Ezio and Borg, Ruben and Hechler, Oliver (2011) Demolition and deconstruction of bridges. In: Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering. University of Malta, pp. 377-390.

R

Rainoldi, Alberto and Cescon, Corrado and Bottin, Andrea and Merletti, Roberto (2002) Surface EMG alterations induced by under water recording. A case study. In: Proc. of the XIV Congress of the International Society of Electrophysiology and Kinesiology, 22-25 June 2002, Vienna, Austria.

Riganti, Gianmario and Cadoni, Ezio (2014) Numerical simulation of the high strain-rate behaviour of quenched and self-tempered reinforcing steel in tension. Materials and Design, 57. pp. 156-167. ISSN 0261-3069

Rizzoli, Andrea Emilio and Davis, J. Richard (1999) Integration and Re-use of environmental models. Environmental Modelling & Software, 14 (6). pp. 493-494.

S

Sacco, Marco and Dal Maso, Giovanni and Milella, Ferdinando and Pedrazzoli, Paolo and Rovere, Diego and Terkaj, Walter (2011) Virtual factory manager. In: Virtual and Mixed Reality-Systems and Applications. Springer, pp. 397-406.

Sacco, Marco and Pedrazzoli, Paolo and Terkaj, Walter (2010) VFF: virtual factory framework. In: UNSPECIFIED.

Scascighini, Luca and Hersche Cupelli, Ruth (2016) Ageing without Losing Mobility and Autonomy: Ein Erfahrungsbericht. Physioactive, 2. pp. 23-27. ISSN 1660-5209

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2015) Lattice Boltzmann simulations on the role of channel structure for reactive capillary infiltration. Engineering Applications of Computational Fluid Mechanics (ahead-). pp. 1-23.

Silvestri, Marco and Pedrazzoli, Paolo and Boer, Claudio and Rovere, Diego (2011) Compensating high precision positioning machine tools by a self learning capable controller. In: 11th euspen International Conference 11th euspen International Conference, 23.05.2011-26.05.2016, Como, Italy.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2013) Dynamic Tensile and Compressive Behaviors of Mild Steel at Wide Range of Strain Rates. Journal of Engineering Mechanics ASCE, 139 (9). pp. 1197-1206.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Dynamic compressive behavior of bearing steel. In: Third Asian Conference on Mechanics of Functional Materials and Structures - 2012, 6-8 December 2012, Delhi - India.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2011) Mechanical Behavior of Advanced High Strength Steel at High Strain Rates. Applied Mechanics and Materials, 82. pp. 178-183. ISSN 1662-7482

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Mechanical behavior of a structural steel at different rates of loading. In: International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM-2012), January 4-6, 2012 , Bengal Engineering and Science University, Shibpur, Howrah, WB, India.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Mechanical characterization of multi phase steel at different rates of loading. Materials Science Forum, 710. pp. 421-426.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2014) Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures, 21 (7). pp. 531-537. ISSN 1537-6494

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2013) Dynamic characteristics of Aluminium alloys at wide range of strain rates. Proceedings of the Indian National Science Academy. Part A, Physical Sciences, 79 (4). pp. 587-595. ISSN 0370-0046

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2012) Strain Rate Sensitivity of Die Steel under Compressive Loads. Advanced Materials Research, 585. pp. 412-416.

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2012) Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads. Advanced Materials Research, 548. pp. 169-173.

Smirnov, Ivan and Petrov, Yuri and Sudenkov, Yuri and Cadoni, Ezio (2011) Threshold characteristics of short pulse loads causing fracture in concrete and rocks. Applied Mechanics and Materials, 82. pp. 106-111. ISSN 1662-7482

Solomos, George and Cadoni, Ezio and Peroni, Marco (2016) Dynamic testing of large concrete specimens with large modified Hopkinson bar apparatuses. In: 22nd DYMAT Technical Meeting, 19.10.2016-21.10.2016, Grenoble, France.

Soncini-Sessa, Rodolfo and Laniado, Eliot and Cellina, Francesca (2004) Capitoli "La valutazione" e "Comparazione, negoziazione e scelta politica". In: Soncini-Sessa, Rodolfo, (ed.) Pianificazione e gestione delle risorse idriche: MODSS per decisioni integrate e partecipate. Collana di Istruzione Scientifica, serie di Ambiente e Territorio . McGraw Hill Italia, Milano.

Soncini-Sessa, Rodolfo and Laniado, Eliot and Cellina, Francesca (2007) Chapters "Evaluation" and "Comparison, negotiations and the final decision". In: Soncini-Sessa, Rodolfo and Castelletti, Andrea and Weber, Enrico, (eds.) Integrated and participatory water resources management – Theory. Elsevier Science, Amsterdam. ISBN 9780444530134

Sorlini, Marzio and Fontana, Alessandro and Diviani, Luca and Alge, Marino and Canetta, Luca and Specht, Ingo (2014) Sustainability Assessment and Advisory in Mould&Die: Implementation Challenges and Solutions. Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World, 439. pp. 423-430. ISSN 1868-4238

Spaetig, Philippe and Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In: IEA Workshop on Fusion Materials Modeling IEA Workshop on Fusion Materials Modeling 2011, April 20-22, Lawrence Livermore National Laboratory, April 20-22, 2011, Lawrence Livermore National Laboratory.

T

Taisch, Marco and Bettoni, Andrea and Canetta, Luca and Corti, Donatella and Pedrazzoli, Paolo (2011) Sustainability and mass customization: can they be integrated in a new production paradigm? Empirical test of a reference frame work. In: 18th International Annual EUROMA Conference.

Teruzzi, Tiziano and Cadoni, Ezio (2003) Application of a life-time management method on existing concrete structures of 25 scholastic facilities by probabilistic estimation of the residual service life. In: Integrated Lifetime Engineering of Buildings and civil Infrastructures ILCDES2003, 1-3 december 2003, Kuopio, Finland.

Teruzzi, Tiziano and Cadoni, Ezio and Frigeri, Giuliano (2005) Assessment of concrete structures durability by estimation of the residual service life. In: ConMat-05, 3rd Intern. Conf., 22-24 August, 2005, Vancouver, Canada.

Teruzzi, Tiziano and Cadoni, Ezio and Frigeri, Giuliano (2003) Evaluation of the residual service life of existing concrete structures: a valuable tool for maintenance planning. In: Life Prediction and Aging Management of Concrete Structures UNSPECIFIED.

Teruzzi, Tiziano and Cadoni, Ezio and Frigeri, Giuliano and Cangiano, Stefano and Plizzari, Giovanni A. (2004) Durability aspects of steel fibre reinforced concrete. In: BEFIB 2004 6th RILEM Symposiumon Fibre-Reinforced Concretes, 20-22 Sept. 2004, Varenna .

Travaini, Emanuele and Pedrazzoli, Paolo and Rinaldi, Roberto and Boer, Claudio (2002) Methodological approach and reconfiguration tool for assembly systems. CIRP Annals-Manufacturing Technology, 51 (1). pp. 9-13. ISSN 0007-8506

Travaini, Emanuele and Valdata, Andrea and Sacco, Marco and Avai, Antonio and Pedrazzoli, Paolo (2007) A Simulation Tool for Evolvable Assembly System. In: Industrial Electronics, 2007. ISIE 2007. IEEE International Symposium on.

Trivilini, Alessandro and Cattaneo, Gianni and Lodi, Ilario (2014) Genitori nella Rete. Armando Dadò Editore, Svizzera italiana.

Trivilini, Alessandro and Sbattella, Licia and Tedesco, Roberto (2014) Forensic Examinations: Computational Analysis and Information Extraction. In: UNSPECIFIED.

U

Urbani, Alessandro and Molinari-Tosatti, Lorenzo and Pedrazzoli, Paolo and Fassi, I and Boer, Claudio (2001) Flexibility and reconfigurability: An analytical approach and some examples. In: 1st - International Conference on Agile and Reconfigurable Manufacturing 1st - International Conference on Agile and Reconfigurable Manufacturing, 21.05.2001-22.05.2001, Ann Arbor - University od Michigan - USA.

Z

Zanganeh, Giw and Ambrosetti, Gianluca and Pedretti, Andrea and Zavattoni, Simone and Barbato, Maurizio and Good, Philipp and Haselbacher, Andreas and Steinfeld, Aldo (2014) A 3 MWth parabolic trough CSP plant operating with air at up to 650°C. In: International Renewable and Sustainable Energy Conference (IRSEC), 17.10.2014-19.10.2014, Ouarzazate, Morocco.

Zavattoni, Simone and Barbato, Maurizio and Geissbühler, Lukas and Haselbacher, Andreas and Zanganeh, Giw and Steinfeld, Aldo (2015) CFD modeling and experimental validation of a high-temperature pilot-scale combined sensible/latent thermal energy storage. In: SCCER Heat and Electricity Storage – 2° Symposium, 5-6 May 2015, PSI - Villigen.

Zavattoni, Simone and Barbato, Maurizio and Geissbühler, Lukas and Haselbacher, Andreas and Zanganeh, Giw and Steinfeld, Aldo (2017) CFD modeling and experimental validation of the TES system exploited in the Pollegio AA-CAES prototype. In: SCCER Heat and Electricity Storage – 5° Symposium, 09.05.2017, PSI - Villigen.

Zavattoni, Simone and Barbato, Maurizio and Geissbühler, Lukas and Haselbacher, Andreas and Zanganeh, Giw and Steinfeld, Aldo (2016) CFD modeling of the Pollegio AA-CAES pilot plant TES system. In: SCCER Heat and Electricity Storage – 4° Symposium, 03.10.2016, PSI - Villigen, Switzerland.

Zavattoni, Simone and Barbato, Maurizio and Pedretti, Andrea and Zanganeh, Giw (2014) CFD modeling of a TES system based on a packed bed of natural rocks. In: 99th Eurotherm Seminar – Advances in Thermal Energy Storage, 28.05.2014-30.05.2014, Lleida, Spain.

Zavattoni, Simone and Barbato, Maurizio and Pedretti, Andrea and Zanganeh, Giw (2015) Evaluation of thermal stratification of an air-based thermocline TES with low-cost filler material. Energy Procedia, 73. pp. 289-296. ISSN 18766102

Zavattoni, Simone and Barbato, Maurizio and Pedretti, Andrea and Zanganeh, Giw (2015) Single-tank TES system – Transient evaluation of thermal stratification according to the second-law of thermodynamics. Energy Procedia, 69. pp. 1068-1077. ISSN 18766102

Zavattoni, Simone and Barbato, Maurizio and Pedretti, Andrea and Zanganeh, Giw and Steinfeld, Aldo (2012) Effective thermal conductivity and axial porosity distribution of a rock-bed TES system: CFD modeling and experimental validation. In: SolarPACES 2012 International Conference, 11.09.2012-14.09.2012, Marrakech, Morocco.

Zavattoni, Simone and Barbato, Maurizio and Pedretti, Andrea and Zanganeh, Giw and Steinfeld, Aldo (2014) High Temperature Rock-bed TES System Suitable for Industrial-scale CSP Plant – CFD Analysis Under Charge/Discharge Cyclic Conditions. Energy Procedia, 46. pp. 124-133. ISSN 1876-6102

Zavattoni, Simone and Barbato, Maurizio and Zanganeh, Giw and Pedretti, Andrea (2016) High temperature thermocline TES – effect of system pre-charging on thermal stratification. AIP Conference Proceedings, 1734 (050043).

Zavattoni, Simone and Gaetano, Antonio and Barbato, Maurizio and Ambrosetti, Gianluca and Good, Philipp and Malnati, F. and Pedretti, Andrea (2014) CFD Analysis of a Receiving Cavity Suitable for a Novel CSP Parabolic Trough Receiver. In: Energy Procedia SolarPACES 2013 International Conference, September 17-20, 2013, Las Vega, USA.

Zavattoni, Simone and Gaetano, Antonio and Montorfano, Davide and Barbato, Maurizio and Ambrosetti, Gianluca and Pedretti, Andrea (2014) A Novel CSP Receiver Based on Airlight Energy Technology - Optimization of the Thermal Insulation System by Means of CFD Analysis. Energy Procedia, 49. pp. 589-598. ISSN 1876-6102

Zavattoni, Simone and Garcia-Polanco, Nelson and Capablo, Joaquin and Doyle, John and Barbato, Maurizio (2014) Household appliances wasted heat storage by means of a packed bed TES with encapsulated PCM. In: 13th International Conference on Sustainable Energy technologies (SET), 25.08.2014-28.08.2014, Geneva, Switzerland.

This list was generated on Tue Sep 26 13:07:17 2017 CEST.