Items where Subject is "Engineering > Mechanical engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | D | F | G | I | K | L | M | O | P | R | S | T | V | Z
Number of items at this level: 116.

A

Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1997) Precision Measurements of Vehicle Crashworthiness by Means of a Large Hopkinson Bar. Journal de Physique IV, 07. C3 79-84.

Amaro, Walter and Diviani, Luca and Montorfano, Davide and Oberrauch, Ermanno and Depinto, Gabriele and Segalini, Simona and Levi, Marinella and Turri, Stefano (2004) Controlling the shrinkage of polymers for customized shoe sole manufacturing. International Journal of Computer Integrated Manufacturing, 17 (7). pp. 633-644. ISSN 0951-192X

B

Belliardi, Marco and Molinari, Marzio (2014) Una per tutti. Ticino Management. ISSN 1664-3798

Berto, Filippo and Crivelli, Daniele and Salamina, Simone and Kusch, Andrea (2021) Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading. Frattura ed Integrità Strutturale, 15 (57). pp. 331-349. ISSN 19718993

Bianchi, Giovanni and Ortona, Alberto and Padovano, Elisa (2019) Graphite-Si-SiC ceramics produced by microwave assisted reactive melt infiltration. Journal of the European Ceramic Society. ISSN 0955-2219

Bianchi, Giovanni and Ortona, Alberto and Vodermayer, Albert (2018) Net shape CMC components produced by composite flow moulding, pyrolysis and reactive silicon infiltration. Ceramics International. ISSN 0272-8842

Bottin, Matteo and Iamartino, Piero and Crivelli, Daniele and Joost, Berndt (2018) An experimental method to measure APIs residence time distribution in the jet mill micronization process. In: PBP - World Meeting, 19.03.2018 - 22.03.2018, Granada, Spain.

C

Cadoni, Ezio (2017) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. In: Proceedings of European Material Research Society - 2017 Fall Meeting European Material Research Society - 2017 Fall Meeting, 18.09.2017-21.09.2017, Warsaw.

Cadoni, Ezio (2018) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. IOP Conference Series: Materials Science and Engineering, 329 (1). ISSN 1757-8981

Cadoni, Ezio (2016) Mechanical characterization of high value alloys and metal-matrix composites (with and without CRM) under high strain rates and high temperature. In: COST CRM_EXTREME - Innovation Towards Technology for Extreme Conditions Industry, 5.10.2016-7.10.2016, Burgos, Spain.

Cadoni, Ezio and Amaro, Walter and Dotta, Matteo and Albertini, Carlo and Giorgetti, Paolo (2006) DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In: Structural Concrete in Switzerland. FIB-CH, pp. 35-38.

Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey and Ripamonti, Antonio (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, 59 (2). pp. 101-117.

Cadoni, Ezio and D'Aiuto, Fabio and Albertini, Carlo (2009) Dynamic behaviour of Advanced High Strength Steels used in the automobile structures. In: Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, pp. 135-141. ISBN 978-2-7598-0472-6

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., 183. 02005.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2021) Effects of elevated temperature on a tungsten alloy at high strain-rate. EPJ Web Conf., 250. ISSN 2100-014X

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2020) High strain-rate behaviour of a Tungsten alloy. Procedia Structural Integrity, 28. 964 - 970.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo and D'Aiuto, Fabio and Federici, Claudio and Maggi, Stefano (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In: Impact Loading of Lightweight Structures Impact Loading of Lightweight Structures, 17-19 June 2008, Trondheim, Norway.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. In: Failure and damage mechanisms of armour materials, 26 November 2010, Madrid.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, 82. pp. 124-129.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano and Kaufmann, Hanspeter (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, 26. 05004.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, 197. pp. 168-175. ISSN 1877-7058

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2023) Combined effects of high strain rate, elevated temperature, and triaxiality on a commercial tungsten alloy. Procedia Structural Integrity, 47. pp. 268-273.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Albertini, Carlo (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Kaufmann, Hanspeter (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, 414 (3). 360 - 366.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spätig, Philippe (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. In: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications and 1st International Conference on Fusion Energy Materials Science, Rosemberg.

Cadoni, Ezio and Forni, Daniele and Mazzucato, Federico and Valente, Anna (2021) Tensile behaviour of Inconel 718 alloys under extreme conditions of temperature and strain-rate. EPJ Web Conf., 250.

Cadoni, Ezio and Forquin, Pascal (2024) Chapter 15 - Dynamic behaviour of concrete and cementitious materials. In: Hokka, Mikko, (ed.) Dynamic Behavior of Materials. Elsevier, Amsterdam, pp. 483-522. ISBN 978-0-323-99153-7

Cadoni, Ezio and Kaufmann, Hanspeter (2012) Opportunities and Challenges of Light-Weight Armour: Failure Mechanisms, Materials, Experiments and Modeling. In: Cadoni, Ezio, (ed.) SUPSI. ISBN 9788875951207

Cadoni, Ezio and Singh, Nilamber Kumar and Forni, Daniele and Singha, Maloy Kumar and Gupta, Narinder Kumar (2016) Strain rate effects on the mechanical behavior of two Dual Phase steels in tension. The European Physical Journal Special Topics, 225. pp. 1-12.

Cadoni, Ezio and Singh, Nilamber Kumar and Singha, Maloy Kumar and Gupta, Narinder Kumar (2011) High strain rate characterization of an advanced high strength steel. In: 3rd International Conference on Impact Loading of Lightweight Structures., June 28-July 1, 2011, Valencienne.

Cadoni, Ezio and Singh, Nilamber Kumar and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Strain rate behaviour of multi-phase and complex-phase steels for automotive applications. EPJ Web of Conferences, 26. 05003.

Carpanzano, Emanuele and Halevi, Y and Montalbano, Giuseppe (2014) Minimum energy control of redundant linear manipulators. Journal of Dynamic Systems, Measurement, and Control.

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, 82. pp. 190-195.

Corridoni, Tommaso and D'Anna, Michele and Fuchs, Hans (2014) Damped mechanical oscillator: Experiment and detailed energy analysis. The Physic teacher, 52. pp. 88-93. ISSN 0031-921X

D

D'Angelo, Claudio and Ortona, Alberto (2012) Cellular Ceramics Produced by Replication: A Digital Approach. Advanced Engineering Materials, 14 (12). pp. 1104-1109. ISSN 14381656

Diviani, Luca (2011) Progettazione e verifica del sistema di cambio mandrini di una rettifica CNC per la produzione di utensili speciali. Masters thesis, SUPSI - Scuola universitaria professionale della Svizzera italiana.

Diviani, Luca and Broggini, Filippo (2012) TSCB - Twin Shape Composed Beam. In: Matérialités UNSPECIFIED.

Diviani, Luca and Ferri, Emanuele and Bianchi, Giovanni and Cau, N and Poli, M and Bonfiglio, P and Guanella, J.C. (2010) Innovative concept for High Precision Grinding Center. In: International Conference on Concurrent Enterprising (ICE 2010).

Diviani, Luca and Puffi, Franco (2014) Core positioning sensors in Pattern dies. In: EICF – 28th International Conference Investment Casting.

D’Angelo, Claudio and Ortona, Alberto and Colombo, Paolo (2012) Finite element analysis of reticulated ceramics under compression. Acta Materialia, 60 (19). pp. 6692-6702. ISSN 13596454

F

Fino, Debora and Ortona, Alberto (2018) Development of a robust and efficient biogas processor for hydrogen production. Part 2: Experimental campaign. International Journal of Hydrogen Energy.

Forni, Daniele and Mazzucato, Federico and Valente, Anna and Cadoni, Ezio (2022) Additively manufactured Ni-based Inconel 718 alloy behaviour under harsh conditions ofstrain-rate and temperature. In: Dynamic Behaviour of Additively Manufactured Structures & Materials UNSPECIFIED.

Forni, Daniele and Mazzucato, Federico and Valente, Anna and Cadoni, Ezio (2021) High strain-rate behaviour of as-cast and as-build Inconel 718 alloys at elevated temperatures. Mechanics of Materials. p. 103859.

G

Gitardi, Diego and Giardini, Mattia and Valente, Anna (2021) Autonomous robotic platform for inspection and repairing operations in harsh environments. International Journal of Computer Integrated Manufacturing.

Gerstgrasser, Marcel and Smolenicki, Darko and Akbari, Mansur and Klippel, Hagen and Roelofs, Hans and Cadoni, Ezio and Wegener, Konrad (2021) Analysis of two parameter identification methods for original and modified Johnson-Cook fracture strains, including numerical comparison and validation of a new blue-brittle dependent fracture model for free-cutting Steel 50SiB8. Theoretical and Applied Fracture Mechanics. p. 102905.

Grazka, Michal and Janiszewski, Jacek and Kruszka, Leopold and Cadoni, Ezio and Forni, Daniele and Riganti, Gianmario (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, 566. pp. 97-103. ISSN 1660-9336

I

Iamartino, Piero and Mercuri, Salvatore and Murdocco, Andrea and Crivelli, Daniele and Malorgio, Shani Sebastian and Joost, Berndt (2018) Modular spiral jet mill: an innovative tool for targeted micronization of pharmaceutical products. In: PBP World Meeting, 19.03.2018 - 22.03.2018, Granada, Spain.

K

Klippel, Hagen and Gerstgrasser, Marcel and Smolenicki, Darko and Cadoni, Ezio and Roelofs, Hans and Wegener, Konrad (2020) Johnson Cook Flow Stress Parameter for Free Cutting Steel 50SiB8. Condensed Matter.

Kusch, Andrea and Crivelli, Daniele and Diviani, Luca and Dotta, Matteo and Salamina, Simone and Berto, Filippo (2023) Influence of pre‐strain and bake hardening on the static and fatigue strength of a DP600 steel sheet. Fatigue & Fracture of Engineering Materials & Structures. ISSN 8756-758X

Kusch, Andrea and Salamina, Simone and Crivelli, Daniele and Berto, Filippo (2021) Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading. Frattura ed Integrità Strutturale, 15 (57). pp. 331-349. ISSN 19718993

L

Leidi, Tiziano and Scocchi, Giulio and Grossi, Loris and Pusterla, Simone and D’Angelo, Claudio and Thiran, Jean-Philippe and Ortona, Alberto (2012) Computing effective properties of random heterogeneous materials on heterogeneous parallel processors. Computer Physics Communications, 183 (11). pp. 2424-2433. ISSN 00104655

M

Mazzucato, Federico and Forni, Daniele and Valente, Anna and Cadoni, Ezio (2021) Laser Metal Deposition of Inconel 718 Alloy and As-built Mechanical Properties Compared to Casting. Materials, 14 (2). p. 437.

Menna, Costantino and Asprone, Domenico and Forni, Daniele and Roviello, Giuseppina and Ricciotti, Laura and Ferone, Claudio and Bozza, Anna and Prota, Andrea and Cadoni, Ezio (2015) Tensile behaviour of geopolymer-based materials under medium and high strain rates. EPJ Web of Conferences, 94. 01034. ISSN 2101-6275

Mirone, Giuseppe and Barbagallo, Raffaele and Cadoni, Ezio (2017) Tensile Test of a HSLA Steel at High Strain Rates with Two Different SHTB Facilities. Procedia Engineering, 197. pp. 89-98.

O

Ortona, Alberto and Barbato, Maurizio and Ferrari, Luca and Gianella, Sandro (2016) Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles. Composite Structures.

Ortona, Alberto and Bianchi, Giovanni and Barbato, Maurizio and Gianella, Sandro and Scocchi, Giulio and Aronovici, Maud (2015) Heat and Mass Transfer in Ceramic Lattices During High‐Temperature Oxidation. Journal of the American Ceramic Society. ISSN 1551-2916

Ortona, Alberto and Bianchi, Giovanni and Casalegno, Valentina (2018) SiC foam sandwich structures obtained by Mo-wrap joining. Materials Letters. ISSN 0167-577X

Ortona, Alberto and Bianchi, Giovanni and Cornolti, Luca and Martinelli, Simone (2018) Microwave heating controlled reactive melt infiltration for graphite‐Si‐SiC ceramics manufacturing. Journal of the American Ceramic Society. ISSN 1551-2916

Ortona, Alberto and Bianchi, Giovanni and Gianella, Sandro (2017) Design and additive manufacturing of periodic ceramic architectures. Journal of Ceramic Science and Technology.

Ortona, Alberto and Bianchi, Giovanni and Santoliquido, Oscar and Dimopoulos Eggenschwiler, Panayotis (2017) Additive manufacturing of periodic ceramic substrates for automotive catalyst supports. International Journal of Applied Ceramic Technology. ISSN 1744-7402

Ortona, Alberto and Bianchi, Giovanni and Vavassori, Paolo (2015) Reactive silicon infiltration of carbon bonded preforms embedded in powder field modifiers heated by microwaves. Ceramics International. ISSN 0272-8842

Ortona, Alberto and D'Angelo, Claudio and Gianella, Sandro and Gaia, Daniele (2012) Cellular ceramics produced by rapid prototyping and replication. Materials Letters, 80. pp. 95-98. ISSN 0167577X

Ortona, Alberto and Fend, Thomas and Yoon, Dang-Hyok and Yu, Hyun-Woo and Raju, Kati (2015) Tubular Si-infiltrated SiCf/SiC composites for solar receiver application—Part 1: Fabrication by replica and electrophoretic deposition. Solar Energy Materials and Solar Cells.

Ortona, Alberto and Fend, Thomas and Yu, Hyun-Woo and Raju, Kati and Yoon, Dang-Hyok (2014) Fabrication of cylindrical SiCf/Si/SiC-based composite by electrophoretic deposition and liquid silicon infiltration. Journal of the European Ceramic Society. ISSN 0955-2219

Ortona, Alberto and Ferrari, Luca and Barbato, Maurizio and D'Angelo, Claudio (2014) Convective heat transfer in cellular ceramic: A 3D numerical solution. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics.

Ortona, Alberto and Ferrari, Luca and Rezaei, Ehsan (2015) Electromagnetic properties of periodic carbon architectures at high frequencies. 2015 International Conference on Electromagnetics in Advanced Applications (ICEAA).

Ortona, Alberto and Fino, Debora (2017) Development of a robust and efficient biogas processor for hydrogen production. Part 1: Modelling and simulation. International Journal of Hydrogen Energy.

Ortona, Alberto and Fino, Paolo and Badini, Claudio and D'Angelo, Claudio (2014) Oxidation Behavior at 1600 °C of Si‐SiC‐ZrB2 Composites Produced by Si Reactive Infiltration. Advanced Engineering Materials. ISSN 1527-2648

Ortona, Alberto and Gaia, Daniele and Gianella, Sandro (2012) High Temperature Applications of Si- SiC Cellular Ceramics. Advanced Engineering Materials. ISSN 1527-2648

Ortona, Alberto and Gianella, Sandro and Burkard, Esser and Barcena, Jorge (2016) Innovative Thermal Management Concepts and Material Solutions for Future Space Vehicles. Journal of Spacecraft and Rockets. ISSN 0022-4650

Ortona, Alberto and Kuzhir, Polina and Paddubskaya, Alesia and Bychanok, Dmitry and Liubimau, Aleksandr and Fierro, Vanessa and Celzard, Alain (2020) 3D-printed, carbon-based, lossy photonic crystals: Is high electrical conductivity the must? Carbon.

Ortona, Alberto and Papetti, Viola and Panayotis Dimopoulos, Panayotis (2018) Additive manufactured open cell structures: Promising substrates for automotive catalysts. 18. Internationales Stuttgarter Symposium.

Ortona, Alberto and Pelanconi, Marco and Colombo, Paolo (2021) Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis. Journal of the European Ceramic Society.

Ortona, Alberto and Pusterla, Simone and Pizzi, Antonio and Fierro, Vanessa (2013) Structure and oxidation resistance of micro-cellular Si–SiC foams derived from natural resins. Ceramics International. ISSN 0272-8842

Ortona, Alberto and Rezaei, Ehsan and Bianchi, Giovanni and Gianella, Sandro (2014) Reticulated Ceramics Under Bending: the Non‐Linear Regime Before Their Catastrophic Failure. Advances in Bioceramics and Porous Ceramics VII: A Collection of Papers Presented at the 38th International Conference on Advanced Ceramics and Composites January 27–31, 2014 Daytona Beach, Florida.

Ortona, Alberto and Rezaei, Ehsan and Gianella, Sandro and Haussener, Sophia (2016) Early-stage oxidation behavior at high temperatures of SiSiC cellular architectures in a porous burner. Ceramics International.

Ortona, Alberto and Santoliquido, Oscar and Bianchi, Giovanni (2017) Additive Manufacturing of Complex Ceramic Architectures. International Conference on Additive Manufacturing in Products and Applications.

Ortona, Alberto and Santoliquido, Oscar and Camerota, Francesco and Rosa, Alice (2021) A novel device to simply 3D print bulk green ceramic components by stereolithography employing viscous slurries. Open Ceramics.

Ortona, Alberto and Santoliquido, Oscar and Colombo, Paolo and Sorarù, Gian Domenico (2018) Polymer‐derived SiCN cellular structures from replica of 3D printed lattices. Journal of the American Ceramic Society. ISSN 1551-2916

Ortona, Alberto and Scocchi, Giulio and Barcena, Jorge and Lagos, Miguel A (2014) Spark plasma sintering of ZrB2–SiC composites with in-situ reaction bonded silicon carbide. Ceramics International. ISSN 0272-8842

Ortona, Alberto and Scocchi, Giulio and Grossi, Loris and Bianchi, Giovanni and D'Angelo, Claudio and Leidi, Tiziano and Gilardi, Raffaele (2013) Evaluation of a simple finite element method for the calculation of effective electrical conductivity of compression moulded polymer–graphite composites. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X

Ortona, Alberto and Vignoles, Gerard (2016) Numerical study of effective heat conductivities of foams by coupled conduction and radiation. International Journal of Thermal Sciences.

Ortona, Alberto and Yoon, Dang-Hyok and Fend, Thomas and Feckler, Gereon and Smirnova, Olena (2015) Tubular Si-infiltrated SiCf/SiC composites for solar receiver application–Part 2: Thermal performance analysis and prediction. Solar Energy Materials and Solar Cells.

P

Pelanconi, Marco and bottacin, samuele and Colombo, Paolo and Ortona, Alberto (2023) Powder bed fusion of polyamide powders combined with different preceramic polymers infiltration and pyrolysis to produce complex-shaped ceramics. Journal of the European Ceramic Society. ISSN 0955-2219

Pelanconi, Marco and Bianchi, Giovanni and bottacin, samuele and Ortona, Alberto (2023) New, 3D binder-jetted carbons with minimal periodic surface structures. Carbon. ISSN ISSN 0008-6223

Papetti, Viola and Onorati, Maria Giovanna and Ortona, Alberto and Dimopoulos Eggenschwiler, Panayotis (2021) Instationary heat and mass transfer phenomena in additive manufactured open cell polyhedral structures for automotive catalysis. Chemical Engineering Science.

Papetti, Viola and Ortona, Alberto and P. Dimopoulos, Eggenschwiler (2018) Additive Manufactured open cell polyhedral structures as substrates for automotive catalysts. International Journal of Heat and Mass Transfer. ISSN 0017-9310

Pelanconi, Marco and Bianchi, Giovanni and Colombo, Paolo and Ortona, Alberto (2021) Fabrication of dense SiSiC ceramics by a hybrid additive manufacturing process. Journal of the American Ceramic Society. ISSN 1551-2916

Pelanconi, Marco and Ortona, Alberto and Al-Ketan, Oraib and Al-Rub, Rashid K- Abu (2019) Additive manufacturing of architected catalytic ceramic substrates based on triply periodic minimal surfaces. Journal of the American Ceramic Society. ISSN 1551-2916

Pelanconi, Marco and Ortona, Alberto and Barbato, Maurizio and Zavattoni, Simone (2019) Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer. Materials & Design.

Pelanconi, Marco and Ortona, Alberto and Zavattoni, Simone and Cornolti, Luca and Barbato, Maurizio and Arrivabeni, Edoardo and Puragliesi, Riccardo and Ferrari, Luca and Gianella, Sandro (2021) Application of Ceramic Lattice Structures to Design Compact, High Temperature Heat Exchangers: Material and Architecture Selection. Materials. ISSN 1996-1944

Pelanconi, Marco and Rezaei, Ehsan and Ortona, Alberto (2020) Cellular ceramic architectures produced by hybrid additive manufacturing: a review on the evolution of their design. Journal of the Ceramic Society of Japan, 128 (9). pp. 595-604. ISSN 1882-0743

R

Rezaei, Ehsan and Barbato, Maurizio and Ortona, Alberto and Gianella, Gianella (2020) Pressure Drop and Convective Heat Transfer in Different SiSiC Structures Fabricated by Indirect Additive Manufacturing. journal of heat transfer.

Rezaei, Ehsan and Barbato, Maurizio and Ortona, Alberto and Haussener, Sophia (2020) Design and optimization of a high-temperature latent heat storage unit. Applied Energy. ISSN 0306-2619

S

Santoliquido, Oscar and Camerota, Francesco and Pelanconi, Marco and Ortona, Alberto (2021) Structured Alumina Substrates for Environmental Catalysis Produced by Stereolithography. Applied Sciences.

Salamina, Simone and Crivelli, Daniele and Diviani, Luca and Berto, Filippo and Razavi, Seyed Mohammad Javad (2022) Strain energy density approach as fatigue assessment of Ti6Al4V specimens machined by WEDM single step technology. International Journal of Fatigue, 161. ISSN 0142-1123

Santoliquido, Oscar and Ortona, Alberto and Colombo, Paolo (2019) Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches. Journal of the European Ceramic Society. ISSN 0955-2219

Sergi, Danilo and Scocchi, Giulio and Ortona, Alberto (2012) Coarse-graining MARTINI model for molecular-dynamics simulations of the wetting properties of graphitic surfaces with non-ionic, long-chain, and T-shaped surfactants. The Journal of Chemical Physics, 137 (9). 094904. ISSN 0021-9606

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2013) Dynamic Tensile and Compressive Behaviors of Mild Steel at Wide Range of Strain Rates. Journal of Engineering Mechanics ASCE, 139 (9). pp. 1197-1206.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Dynamic compressive behavior of bearing steel. In: Third Asian Conference on Mechanics of Functional Materials and Structures - 2012, 6-8 December 2012, Delhi - India.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2011) Dynamic tensile behavior of multi phase high yield strength steel. Materials & Design, 32 (10). 5091 - 5098.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2011) Mechanical Behavior of Advanced High Strength Steel at High Strain Rates. Applied Mechanics and Materials, 82. pp. 178-183. ISSN 1662-7482

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Mechanical behavior of a structural steel at different rates of loading. In: International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM-2012), January 4-6, 2012 , Bengal Engineering and Science University, Shibpur, Howrah, WB, India.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Mechanical characterization of multi phase steel at different rates of loading. Materials Science Forum, 710. pp. 421-426.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2014) Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures, 21 (7). pp. 531-537. ISSN 1537-6494

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2013) Dynamic characteristics of Aluminium alloys at wide range of strain rates. Proceedings of the Indian National Science Academy. Part A, Physical Sciences, 79 (4). pp. 587-595. ISSN 0370-0046

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2012) Strain Rate Sensitivity of Die Steel under Compressive Loads. Advanced Materials Research, 585. pp. 412-416.

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2012) Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads. Advanced Materials Research, 548. pp. 169-173.

Solomos, George and Cadoni, Ezio and Peroni, Marco (2016) Dynamic testing of large concrete specimens with large modified Hopkinson bar apparatuses. In: 22nd DYMAT Technical Meeting, 19.10.2016-21.10.2016, Grenoble, France.

Sorlini, Marzio and Fontana, Alessandro and Diviani, Luca and Alge, Marino and Canetta, Luca and Specht, Ingo (2014) Sustainability Assessment and Advisory in Mould&Die: Implementation Challenges and Solutions. Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World, 439. pp. 423-430. ISSN 1868-4238

Spaetig, Philippe and Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In: IEA Workshop on Fusion Materials Modeling IEA Workshop on Fusion Materials Modeling 2011, April 20-22, Lawrence Livermore National Laboratory, April 20-22, 2011, Lawrence Livermore National Laboratory.

T

Toffanin, Riccardo and Caputo, Paola and Belliardi, Marco and Curti, Vinicio (2022) Low and Ultra-Low Temperature District Heating Equipped by Heat Pumps — An Analysis of the Best Operative Conditions for a Swiss Case Study. Energies. ISSN https://doi.org/10.3390/en15093344

V

Valente, A. and Pavesi, G. and Zamboni, M. and Carpanzano, Emanuele (2022) Deliberative robotics - a novel interactive control framework enhancing human-robot collaboration. CIRP Annals, 71 (1). pp. 21-24.

Z

Zamboni, Mattia and Valente, Anna (2020) Collaborative robots: Overview and future trends. In: Industrial Robots: Design, Applications and Technology. Robotics Research and Technology, 1 . Nova Science Publishers, Inc., San Francisco, pp. 171-199. ISBN 978-1-53617-779-4

Zhi-qiang, Lu and De-yuan, Li and Diviani, Luca (2014) Strength Analysis of TSCB Pedestrian Bridges Based on Tsai-Wu Failure Criteria. Journal of Guangdong University of Technology, 31 (1). pp. 101-106.

This list was generated on Tue Mar 19 03:55:23 2024 CET.