 | Up a level |
Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1997) Impact Fracture Process and Mechanical Properties of Plain Concrete by Means of an Hopkinson Bar Bundle. Journal de Physique IV, 07 (C3). C3-915.
Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1999) Study of the mechanical properties of plain concrete under dynamic loading. Experimental Mechanics, 39 (2). pp. 137-141.
Asprone, Domenico and Cadoni, Ezio and Lucolano, Fabio and Prota, Andrea (2014) Analysis of the strain-rate behavior of a basalt fiber reinforced natural hydraulic mortar. Cement and Concrete Composites, 53 (10). pp. 52-58.
Asprone, Domenico and Cadoni, Ezio and Prota, Andrea (2009) Experimental Analysis on Tensile Dynamic Behavior of Existing Concrete under High Strain Rates. ACI Structural Journal, 106. pp. 106-113.
Asprone, Domenico and Cadoni, Ezio and Prota, Andrea (2009) Tensile High Strain-Rate Behavior of Reinforcing Steel from an Existing Bridge. ACI Structural Journal, 106 (4). pp. 523-529.
Asprone, Domenico and Cadoni, Ezio and Prota, Andrea and Manfredi, Gaetano (2009) Dynamic behavior of a Mediterranean natural stone under tensile loading. International Journal of Rock Mechanics and Mining Sciences, 46 (3). pp. 514-520.
Asprone, Domenico and Cadoni, Ezio and Prota, Andrea and Manfredi, Gaetano (2009) Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester Composite. ASCE - Journal of Composites for Construction, 13 (6). pp. 558-564.
Asprone, Domenico and Cadoni, Ezio and Prota, Andrea and Manfredi, Gaetano (2009) Tensile dynamic behavior of gfrp subjected to controlled strain rates and aging conditions. In: frprcs9, 13-15 July 2009, Sydney, Australia.
Asprone, Domenico and Iucolano, Fabrizio and Cadoni, Ezio and Prota, Andrea (2011) Analysis of the strain-rate beahavior of a basalt fiber reinforced mortar. Applied Mechanics and Materials, 82. pp. 196-201.
Asprone, Domenico and Menna, Costantino and Bos, Freek and Mata-Falcón, Jaime and Ferrara, Liberato and Auricchio, Ferdinando and Cadoni, Ezio and Cunha, Viktor and Esposito, Laura and Fromm, Asko and Grünewald, Steffen and Kloft, Harald and Mechtcherine, Viktor and Nerella, Venkatesh Naidu and Schipper, Roel (2022) Structural Design and Testing of Digitally Manufactured Concrete Structures. In: Digital Fabrication with Cement-Based Materials. Springer International Publishing, Cham, pp. 187-222.
Bocca, Pietro and Cadoni, Ezio (1995) Analisi del comportamento di ancoraggi nel calcestruzzo sollecitati a trazione e soggetti a fatica. Industria delle Costruzioni, 281. pp. 66-72.
Bocca, Pietro and Cadoni, Ezio (1997) Comportamento di ancoraggi nel calcestruzzo sotto carichi ripetuti. Industria Italiana del Cemento, 720. pp. 324-329.
Boni, Claudio and Silvestri, Marco and Royer Carfagni, Gianni (2020) Flexural tensegrity of segmental beams. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476 (2237). pp. 1-20. ISSN 13645021
Bonomo, Pierluigi and Di Giovanni, Gianni (2009) Adeguamento sismico e progetto architettonico. Analisi di un caso-studio. In: Il sisma (ArTec). Ricordare, prevenire, progettare. Alinea. ISBN 978-88-6055-460-4
Bonomo, Pierluigi and Parolini, Fabio and Corti, Paolo and Frontini, Francesco and Bellenda, Giovanni and Caccivio, Mauro (2022) Impact resistance of BIPV systems: New testing procedure for performance assessment of multifunctional products. Energy Science & Engineering. ISSN 2050-0505
Bragov, Anatoly M. and Cadoni, Ezio and Konstantinov, Alexander and Lomunov, Andrey (2011) Tension and compression behavior of pre-stressed steel strands at high strain rate. Applied Mechanics and Materials, 82. pp. 154-159. ISSN 1662-7482
Bragov, Anatoly M. and Konstantinov, Alexander and Lomunov, Andrey and Forni, Daniele and Riganti, Gianmario and Cadoni, Ezio (2015) High strain rate response of UHP(FR)C in compression. EPJ Web of Conferences, 94. ISSN 2101-6275
Briccola, Deborah and Bruggi, Matteo (2019) Analysis of 3D linear elastic masonry-like structures through the API of a finite element software. Advances in Engineering Software, 133. pp. 60-75. ISSN 09659978
Briccola, Deborah and Bruggi, Matteo and Taliercio, Alberto (2018) Analysis of 3D no-tension masonry-like walls. Journal of Mechanics of Materials and Structures, 13 (5). pp. 631-646. ISSN 1559-3959
Briccola, Deborah and Bruggi, Matteo and Taliercio, Alberto (2019) Assessment of 3D Linear Elastic Masonry-Like Vaulted Structures. Key Engineering Materials, 817. pp. 50-56. ISSN 1662-9795
Briccola, Deborah and Cadoni, Ezio (2021) Split Hopkinson bar tests on metaconcrete: modeling and numerical simulations. EPJ Web Conf., 250.
Briccola, Deborah and Cefis, Nicola (2021) Equivalent stiffness of non-symmetrical cable systems in cable-stayed bridges. In: INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING ICCMSE 2020 International Conference of Computational Methods in Sciences and Engineering ICCMSE 2020.
Cadoni, Ezio (2011) Assessment of the structural materials under high stain-rate in tension. In: Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering. University of Malta, pp. 327-338.
Cadoni, Ezio (2010) Dynamic Characterization of Orthogneiss Rock Subjected to Intermediate and High Strain Rate in Tension. Rock Mechanics and Rock Engineering, 43 (6). pp. 667-676.
Cadoni, Ezio (2016) Experimental and numerical characterization of the mechanical behavior of ultra-high performance fibre-reinforced concrete under high loading rate. In: DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 06.07.2016-07.07.2016, S.M. Tucuman, Argentine. (Unpublished)
Cadoni, Ezio (2013) Fracture behaviour of concrete at high strain rate. In: Fracture Mechanics of Concrete and Concrete Structures UNSPECIFIED, 10-14 March, 2013, Toledo (Spain).
Cadoni, Ezio (2016) Il comportamento dei conglomerati cementizi sollecitati ad alta velocità di deformazione. In: Scuola di Perfezionamento e Specializzazione"Leganti, malte, calcestruzzi e materiali innovativi per costruire sostenibile", 12.09.2016-16.09.2016, Naples, Italy. (Unpublished)
Cadoni, Ezio (2018) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. IOP Conference Series: Materials Science and Engineering, 329 (1). ISSN 1757-8981
Cadoni, Ezio (2013) Mechanical characterization of rock materials at high strain-rate. In: Zhao, Jian and Li, Jianchun, (eds.) CRC Press. ISBN 978-1-138-00056-8
Cadoni, Ezio (2015) On the mechanical characterization of materials for Protection of Infrastructure Elements from the effects of IEDs. In: Koduri, V.H.R and Banthia, N.K., (eds.) DEStech, Lancaster PA _USA. ISBN ISBN 978-1-60595-227-7
Cadoni, Ezio (2015) Protection of Infrastructure Elements from the effects of IEDs: the role of the mechanical characterization of materials at high strain rate. In: 16th Intenational Symposium on the Interaction of Effects of Munitions with Structures UNSPECIFIED.
Cadoni, Ezio and Albertini, Carlo (2011) Modified Hopkinson Bar Technologies Applied to the High Strain Rate of Rocks. In: Zhou, Yingxin and Zhao, Jian, (eds.) Advances in Rock Dynamics and Applications. Taylor & Francis, pp. 79-104. ISBN 978-0-415-61351-4
Cadoni, Ezio and Albertini, Carlo and Dotta, Matteo and Forni, Daniele and Giorgetti, Paolo and Riganti, Gianmario (2009) Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In: Rock fragmentation by blasting. Taylor & Francis Group, Granada, pp. 35-41. ISBN 978-0-415-48296-7
Cadoni, Ezio and Albertini, Carlo and Forni, Daniele (2008) Impact behaviour of materials: a tool for the de-sign of rockfall protective shelters. In: Interdisciplinary Workshop on Rock Fall Protection, June 23-25, 2008, Morschach, Switzerland.
Cadoni, Ezio and Albertini, Carlo and Solomos, George (2006) Analysis of the concrete behaviour in tension at high strain-rate by a modified Hopkinson bar in support of impact resistant structural design. Journal de Physique IV, 134. pp. 647-652.
Cadoni, Ezio and Amaro, Walter and Dotta, Matteo and Albertini, Carlo and Giorgetti, Paolo (2006) DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In: Structural Concrete in Switzerland. FIB-CH, pp. 35-38.
Cadoni, Ezio and Asprone, Domenico and Dotta, Matteo and Forni, Daniele and Prota, Andrea and Manfredi, Gaetano (2009) Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In: Structures under extreme loading. National Defence Academy - Japan.
Cadoni, Ezio and Asprone, Domenico and Prota, Andrea (2007) Dynamic behavior of concrete and steel belonging to the Tenza bridge. In: Concrete under severe conditions. ACTES DES JOURNÉES SCIENTIFIQUES DU LCPC, pp. 1341-1348.
Cadoni, Ezio and Asprone, Domenico and Prota, Andrea (2007) High strain-rate testing analysis of concrete and steel for the assessment of the Tenza Bridge under blast loading. In: New trends in fractures mechanics of concrete. Balkema, pp. 627-635. ISBN 978-0-415-44065-3
Cadoni, Ezio and Asprone, Domenico and Prota, Andrea (2007) Structural assessment of the Tenza Bridge under extreme loads: the role of the material characterization at high strain-rate. In: Performance, protection & strengthening of structures under extreme loading. UBC.
Cadoni, Ezio and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2009) Criteria for optimized design of demolition of a bridge: the Tenza bridge. In: Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering. University of Malta, pp. 211-216. ISBN 978-973-638-428-8
Cadoni, Ezio and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2009) Material characterization at high strain-rate to design a controlled demolition of a bridge. In: proceeding IF CRASC’09, 1st Congress on forensic engineering, 4th Congress on Collapses, Reliability and Retrofit of Structures 4th Congress on Collapses, Reliability and Retrofit of Structures, 2-4/12/2009, Napoli.
Cadoni, Ezio and Briccola, Deborah and Dotta, Matteo and Forni, Daniele (2022) Combined effect of elevated temperature and high strain rates on S690QL high strength steel. Journal of Constructional Steel Research, 199. p. 107519.
Cadoni, Ezio and Briccola, Deborah and Dotta, Matteo and Forni, Daniele (2022) Dynamic Behaviour of Two UHPC Matrixes in Direct Tension. ACI Symposium Publication, 355. pp. 11-18.
Cadoni, Ezio and Cangiano, Stefano and Frigeri, Giuliano and Plizzari, Giovanni A. and Teruzzi, Tiziano (2005) Durability and fracture behaviour of steel fibre reinforced concrete. In: Construction Materials: Performances, Innovations and Structural implication. Taylor & Francis. ISBN 0-7277-3401-6
Cadoni, Ezio and Cangiano, Stefano and Frigeri, Giuliano and Plizzari, Giovanni A. and Teruzzi, Tiziano (2005) On durability of Steel Fibre Reinforced Concrete. In: Construction Materials: Performances, Innovations and Structural implication. Thomas Telford, pp. 477-486. ISBN 0-7277-3401-6
Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2010) Behaviour of High Performance Fibre Reinforced Cementitious Composites under high dynamic loading and fire for safe tunnels. In: Urban Habitat Constructions under Catastrophic Events. Taylor & Francis Group.
Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2008) Dynamic behaviour of HPFR cementitious composites. In: Ultra High Performance Concrete. Structural Materials and Engineering Series, 10 . Kassel University Press, pp. 743-750. ISBN 978-3-89958-376-2
Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2012) Dynamic behaviour of HPFRCC in tension. EPJ Web of Conferences, 26. 01014.
Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2009) Dynamic characterization of advanced cementitious composites in design and construction of safe tunnel. In: Structures under extreme loading. National Defence Academy - Japan. ISBN 9784990480608
Cadoni, Ezio and Caverzan, Alessio and di Prisco, Marco (2010) On the influence of high temperature on the dynamic behaviour of high performance fibre reinforced cementitious composites. In: Concrete under severe conditions - Environment and Loading. Taylor & Francis, pp. 1331-1338. ISBN 9780415593168
Cadoni, Ezio and Colombo, Paolo and Terminio, Andrea (1999) Il controllo di qualità del calcestruzzo strutturale garanzia della durabilità. Industria Italiana del Cemento.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2017) Analysis of the Materials Behaviour at High Strain-Rate in Support of Impact Resistant Structural Design. In: 7th International Conference on Advances in Experimental Structural Engineering, 06.09.2017-08.09.2017, Pavia.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., 183. 02005.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2016) Effect of the high temperature on the high strain rate behaviour of an austenitic stainless steel. In: 1st International Conference on Impact Loading of Structures and Materials, 22.05.2016-26.05.2016, Torino, Italy.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2021) Modern high strength steels under high strain-rate regimes. EPJ Web Conf., 250.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2016) Tensile behaviour of reinforcing steels at high strain rate and high temperature. Key Engineering Materials, 711. pp. 791-798. ISSN 1013-9826
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo (2017) Dynamic behaviour of UHPC in compression by means of 3D-Modified Hopkinson Bar. In: Proceedings of 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017) 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), 29.11.2017-01.12.2017, Melbourne.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2010) Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In: Structural Concrete in Switzerland. FIB-CH, pp. 28-31.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Caverzan, Alessio and di Prisco, Marco (2010) Advanced cementitious composites in the design and construction of safe tunnels. In: Structural Concrete in Switzerland. FIB-CH, pp. 12-15.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2020) Dynamic response of UHPFRCs in direct-shear tests. Procedia Structural Integrity, 28. 933 - 942.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Albertini, Carlo (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2019) Dynamic Behaviour of UHPFRC Under High Strain-Rate. In: Modern Developments in Performance of Structures Under Extreme Loading Proceedings of PROTECT 2019, September 16-17, 2019, Whistler, BC, Canada.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2021) Experimental investigation on the response of UHP(FR)C at high stress-rates under compression. EPJ Web Conf., 250.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. In: UNSPECIFIED, 22-24 April, 2013, Tel Aviv.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, 82. pp. 86-91.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2015) High strain rate behaviour in tension of steel B500A reinforcing bar. Materials and Structures, 48 (6). pp. 1803-1813. ISSN 1359-5997
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Albertini, Carlo (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, 49 (8). pp. 657-666.
Cadoni, Ezio and Dotta, Matteo and Meda, Alberto and Plizzari, Giovanni A. (2007) Analysis of Fiber Reinforced Concrete under impact loading. In: Performance, protection & strengthening of structures under extreme loading. UBC. ISBN 9780888658166
Cadoni, Ezio and Dotta, Matteo and Meda, Alberto and Plizzari, Giovanni A. (2007) Behaviour of polypropylene Fibre Reinforced Concrete under static and impact tensile loading. In: Concrete under severe conditions. Actes des journées scientifiques du LCPC, Parigi, pp. 1267-1274.
Cadoni, Ezio and Fenu, Luigi and Forni, Daniele (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, 35. 399 - 407.
Cadoni, Ezio and Fontana, Mario and Forni, Daniele and Knobloch, Markus (2018) High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures. The European Physical Journal Special Topics, 227 (1). pp. 179-199.
Cadoni, Ezio and Forni, Daniele (2019) Austenitic Stainless Steel Under Extreme Combined Conditions of Loading and Temperature. Journal of Dynamic Behavior of Materials. ISSN 2199-7454
Cadoni, Ezio and Forni, Daniele (2016) Experimental analysis of the UHPFRCs behavior under tension at high stress rate. The European Physical Journal Special Topics, 225. pp. 1-12.
Cadoni, Ezio and Forni, Daniele (2015) High strain rate behaviour in tension of different reinforcing steels. In: Kodur, V.H.R and Banthia, N.K., (eds.) DEStech, Lancaster - PA - USA. ISBN 978-1-60595-227-7
Cadoni, Ezio and Forni, Daniele (2019) High strain-rate response of UHPFRC in support of impact resistant structural design. In: 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X, 24-26 giugno 2019, Bayonne (F).
Cadoni, Ezio and Forni, Daniele (2021) Mechanical behaviour of B500A rebars: effect of elevated temperature and high strain-rate. Fire Safety Journal (103321).
Cadoni, Ezio and Forni, Daniele (2019) Mechanical behaviour of a very-high strength steel (S960QL) under extreme conditions of high strain rates and elevated temperatures. Fire Safety Journal, 109. ISSN 0379-7112
Cadoni, Ezio and Forni, Daniele (2020) Strain-rate effects on S690QL high strength steel under tensile loading. Journal of Constructional Steel Research.
Cadoni, Ezio and Forni, Daniele and Bonnet, Emmanuel and Svatopluk Dubrusky, Svatopluk Dubrusky (2019) Experimental study on direct tensile behaviour of UHPFRC under high strain-rates. Construction and Building Materials, 218. pp. 667-680. ISSN 0950-0618
Cadoni, Ezio and Forni, Daniele and Botturi, Luca (2008) Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers. TechTrends, Volume (5). pp. 17-21. ISSN 1559-7075
Cadoni, Ezio and Forni, Daniele and Gieleta, Roman and Kruszka, Leopold (2018) Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates. The European Physical Journal Special Topics, 227 (1). pp. 29-43.
Cadoni, Ezio and Labibes, Kamel and Albertini, Carlo and Berra, Mario and Giangrasso, Marco (2001) Strain-rate effect on the tensile behaviour of concrete at different relative humidity levels. Materials and Structures, 34 (1). pp. 21-26.
Cadoni, Ezio and Labibes, Kamel and Berra, Mario and Giangrasso, Carlo (2000) High-strain-rate tensile behaviour of concrete. Magazine of Concrete Research, 52 (5). pp. 365-370. ISSN 0024-9831
Cadoni, Ezio and Labibes, Kamel and Berra, Mario and Giangrasso, Marco and Albertini, Carlo (2001) Influence of Aggregate Size on Strain-Rate Tensile Behavior of Concrete. ACI Materials Journal, 98 (3). pp. 220-223.
Cadoni, Ezio and Meda, Alberto and Plizzari, Giovanni A. (2008) Rate sensitivity of HPFRCC under tensile loading: from quasi-static to high strain rates. In: Fibre Reinforced Concrete: Design and Applications. Rilem, India, pp. 441-450. ISBN 978-2-35158-064-6
Cadoni, Ezio and Meda, Alberto and Plizzari, Giovanni A. (2009) Tensile behaviour of FRC under high strain-rate. Materials and Structures, 42 (9). pp. 1283-1294.
Cadoni, Ezio and Solomos, George and Albertini, Carlo (2013) Concrete behaviour in direct tension tests at high strain rates. Magazine of Concrete Research, 65 (11). pp. 660-672. ISSN 0024-9831
Cadoni, Ezio and Solomos, George and Albertini, Carlo (2009) Mechanical characterisation of concrete in tension and compression at high strain rate using a modified Hopkinson bar. Magazine of Concrete Research, 61 (3). pp. 221-230. ISSN 0024-9831
Cadoni, Ezio and Solomos, George and Berra, Mario and Albertini, Carlo (2005) High strain-rate behaviour of plain concrete subjected to tensile and compressive loading. In: Construction Materials: Performances, Innovations and Structural implication ConMat-05, 3rd Intern. Conf., 22-24 August, 2005, Vancouver, Canada.
Cadoni, Ezio and Teruzzi, Tiziano and Muttoni, Aurelio and Suter, René and Brühwiler, Eugen (2004) FRC in Switzerland: research, applications and perspectives. In: FRC: From theory to practice. Starlink, pp. 157-168.
Cadoni, Ezio and di Prisco, Marco (2011) Performance, Protection and Strengthening of Structures under Extreme Loading. Applied Mechanics and Materials, 82 . Trans Tech Publication, p. 900. ISBN 978-3-03785-217-0
Caverzan, Alessio and Cadoni, Ezio and Colombo, Matteo and di Prisco, Marco (2010) Comportamento dinamico ed alle alte temperature di compositi cementizi fibrorinforzati ad alte prestazioni. In: Proceedings of 18° Congress C.T.E. 18° Congresso C.T.E., Brescia.
Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2009) Behaviour of advanced cementitious composites under dynamic loading and fire. In: Structures Response to Impact and Blast International Workshop on Structures Response to Impact and Blast, 15-17 November 2009, Haifa, Israel.
Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2011) Dynamic behavior of HPFRCC at high strain rate: the fiber role. In: High Performance Fiber Reinforced Cement Composites. RILEM, pp. 339-346.
Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2011) Dynamic tensile behaviour of Self Compacting Steel Fibre Reinforced Concrete. Applied Mechanics and Materials, 82. pp. 220-225.
Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2013) Dynamic tensile behaviour of high performance fibre reinforced cementitious composites after high temperature exposure. Mechanics of Materials, 59. pp. 87-109.
Caverzan, Alessio and Cadoni, Ezio and di Prisco, Marco (2012) Tensile behaviour of high performance fibre-reinforced cementitious composites at high strain rates. International Journal of Impact Engineering, 45. 28 - 38.
Caverzan, Alessio and di Prisco, Marco and Cadoni, Ezio (2015) Dynamic behaviour of HPFRCC: The influence of fibres dispersion. EPJ Web of Conferences, 94. 01064. ISSN 2101-6275
Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In: Proceedings of XI Convegno Nazionale AIMAT Proceedings of XI Convegno Nazionale AIMAT, 16 – 19 settembre 2012, Gaeta (LT).
Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, 82. pp. 190-195.
Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Performance of multi-scale fiber reinforced cement composites at high strain rate. In: The new boundaries of structural concrete UNSPECIFIED, 15-16 Settembre 2011, Ancona.
Coppola, Luigi and Coffetti, Denny and Crotti, Elena and Forni, Daniele and Cadoni, Ezio (2018) Fiber reinforced mortars based on free Portland-CSA binders under high stress rate. EPJ Web Conf., 183. 04013.
Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2018) Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC). EPJ Web Conf., 183. 02015.
Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2017) Influence of Fiber Type on the Tensile Behavior of Strain-Hardening Cement-Based Composites (SHCC) Under Impact Loading. In: Strain-Hardening Cement-Based Composites. Springer, pp. 257-265.
Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2016) Influence of fibre type on the tensile behaviour of strain-hardening cement-based composites (SHCC) under impact loading. In: 22nd DYMAT Technical Meeting, 19.10.2016-21.10.2016, Grenoble, France.
Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2017) Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading. Cement and Concrete Research, 102. pp. 16-28.
De Matteis, Gianfranco and Cadoni, Ezio and Asprone, Domenico (2010) Analysis of behaviour of constructions under impact and explosions: approaches for structural analysis, from material modeling to structural response. In: Urban Habitat Constructions under Catastrophic Events. Taylor & Francis Group, pp. 161-178.
Diviani, Luca and Broggini, Filippo (2012) TSCB - Twin Shape Composed Beam. In: Matérialités UNSPECIFIED.
Dobruský, Svatopluk and Forni, Daniele and Cadoni, Ezio (2017) Mechanical Characterization of UHPC at High Strain Rate. In: 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), 29.11.2017-01.12.2017, Melbourne.
Dobruský, Svatopluk and Forni, Daniele and Cadoni, Ezio (2018) Response of UHPFRCs in Tension under High Stress Rate. EPJ Web Conf., 183. 04003.
di Prisco, Marco and Beltrami, Carlo and Bonalumi, Pamela and Cadoni, Ezio and Caverzan, Alessio and Colombo, Matteo and Ferrara, Liberato and Martinelli, Paolo (2013) HPFRC tunnel segments to mitigate the risk of exceptional loads. In: Engineering a Concrete Future: Technology, Modeling & Construction UNSPECIFIED, 22-24 April, 2013, Tel Aviv.
Evstifeev, Alexey and Cadoni, Ezio and Petrov, Yuri (2012) Incubation time approach to rock dynamic strength characterization. EPJ Web of Conferences, 26. 01041.
Fenu, Luigi and Aymerich, Francesco and Francesconi, Luca and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2018) Dynamic behaviour of an earthen material under different impact loading conditions. EPJ Web Conf., 183. 02014.
Fenu, Luigi and Congiu, E. and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2016) Comparison between the dynamic behaviour of cement mortars reinforced with glass and basalt fibres. In: ITALIAN CONCRETE DAYS. EVOLUZIONE E SOSTENIBILITÀ DELLE STRUTTURE IN CALCESTRUZZO, 27.10.2016-28.10.2016, Rome, Italy.
Fenu, Luigi and Forni, Daniele and Cadoni, Ezio (2016) Dynamic behaviour of cement mortars reinforced with glass and basalt fibres. Composites Part B: Engineering, 92 (5). pp. 142-150.
Fenu, Luigi and Forni, Daniele and Cadoni, Ezio (2015) Energy absorption at high strain rate of glass fiber reinforced mortars. EPJ Web of Conferences, 94. 01030. ISSN 2101-6275
Forni, Daniele (2017) Progressive collapse induced by fire and blast. PhD thesis, Politecnico di Torino.
Forni, Daniele and Cadoni, Ezio (2016) Experimental and numerical analysis of S355 steel under extreme coupled effect of high temperatures and high strain rates. In: DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 06.07.2016-07.07.2016, S.M. Tucuman, Argentine. (Unpublished)
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2017) Blast effects on steel columns under fire conditions. Journal of Constructional Steel Research, 136. pp. 1-10.
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2017) Effetti combinati di temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In: Ingegneria forense, crolli affidabilità strutturale e consolidamento IFCRASC17, 14.09.2017-16.09.2017, Politecnico di Milano.
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) High strain rate response of S355 at high temperatures. Materials and Design, 94. pp. 467-478. ISSN 0261-3069
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) Mechanical properties of S355 under extreme coupled effect of high temperatures and high strain rates. In: UNSPECIFIED.
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) Strain rate behaviour in tension of S355 steel: Base for progressive collapse analysis. Engineering Structures, 119. pp. 164-173. ISSN 0141-0296
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2019) Structural Robustness: The Role of the Mechanical Characterization of Materials Under Extreme Loadings. In: Modern Developments in Performance of Structures Under Extreme Loading UNSPECIFIED.
Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) The effect of high strain rate on tensile properties of S355 steel at high temperature. In: Zingoni, Alphose, (ed.) Taylor & Francis Group, London. ISBN 978-1-138-02927-9
Kruszka, Leopold and Mocko, Wojciech and Fenu, Luigi and Cadoni, Ezio (2015) Comparative experimental study of dynamic compressive strength of mortar with glass and basalt fibres. EPJ Web of Conferences, 94. 05008. ISSN 2101-6275
Luccioni, Bibiana and Isla, Facundo and Forni, Daniele and Cadoni, Ezio (2016) Modelado de Hormigones de Ultra Altas Prestaciones Reforzados con Fibras bajo Altas Velocidades de Deformación. Mecánica Computacional, XXXIV. pp. 199-223. ISSN 1666-6070
Luccioni, Bibiana and Isla, Facundo and Forni, Daniele and Cadoni, Ezio (2018) Modelling UHPFRC tension behavior under high strain rates. Cement and Concrete Composites, 91. pp. 209-220.
Menna, Costantino and Asprone, Domenico and Forni, Daniele and Roviello, Giuseppina and Ricciotti, Laura and Ferone, Claudio and Bozza, Anna and Prota, Andrea and Cadoni, Ezio (2015) Tensile behaviour of geopolymer-based materials under medium and high strain rates. EPJ Web of Conferences, 94. 01034. ISSN 2101-6275
Napolitano, Rosanna and Forni, Daniele and Menna, Costantino and Asprone, Domenico and Cadoni, Ezio (2021) Dynamic characterization of the layer-interface properties of 3D-printed concrete elements. Case Studies in Construction Materials, 15. e00780. ISSN 2214-5095
Napolitano, Rosanna and Menna, Costantino and Forni, Daniele and Asprone, Domenico and Cadoni, Ezio (2020) Dynamic Behaviour of Layered 3D Printed Concrete Elements. RILEM Bookseries, 28. pp. 478-488.
Napolitano, Rosanna and Menna, Costantino and Forni, Daniele and Asprone, Domenico and Cadoni, Ezio (2021) Mechanical characterization of 3D printed concrete subjected to dynamic loading. EPJ Web Conf., 250. 01009.
Pahud, Daniel and Hubbuch, Markus (2007) Mesures et optimisation de l’installation avec pieux énergétiques du Dock Midfield de l’aéroport de Zürich. Project Report UNSPECIFIED
Peroni, Marco and Tsionis, George and Solomos, George and Cadoni, Ezio and Knobloch, Markus and Fontana, Mario and Forni, Daniele and Dotta, Matteo (2022) SUSHI - Steel Under Severe High Impact. Technical Report Publications Office of the European Union , Luxembourg (Luxembourg).
Portioli, Francesco and D'Aniello, Mario and Cadoni, Ezio and Borg, Ruben and Hechler, Oliver (2011) Demolition and deconstruction of bridges. In: Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering. University of Malta, pp. 377-390.
Riganti, Gianmario and Cadoni, Ezio (2020) Multiple Pseudo-Plastic Appearance of the Dynamic Fracture in Quasi-Brittle Materials. Materials, 13 (21). ISSN 1996-1944
Riganti, Gianmario and Cadoni, Ezio (2014) Numerical simulation of the high strain-rate behaviour of quenched and self-tempered reinforcing steel in tension. Materials and Design, 57. pp. 156-167. ISSN 0261-3069
Riganti, Gianmario and Cadoni, Ezio (2015) The use of the Split Hopkinson Bar tests to assess the material models for concrete. In: 16th International Symposium for the Interaction of the Effects of Munitions with Structures UNSPECIFIED.
Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Dynamic compressive behavior of bearing steel. In: Third Asian Conference on Mechanics of Functional Materials and Structures - 2012, 6-8 December 2012, Delhi - India.
Smirnov, Ivan and Petrov, Yuri and Sudenkov, Yuri and Cadoni, Ezio (2011) Threshold characteristics of short pulse loads causing fracture in concrete and rocks. Applied Mechanics and Materials, 82. pp. 106-111. ISSN 1662-7482
Solomos, George and Berra, Mario and Cadoni, Ezio (2007) Impact testing of anchors in concrete. Actes des journées scientifiques du LCPC, 2. pp. 1305-1312. ISSN 1628-4704
Solomos, George and Cadoni, Ezio and Peroni, Marco (2016) Dynamic testing of large concrete specimens with large modified Hopkinson bar apparatuses. In: 22nd DYMAT Technical Meeting, 19.10.2016-21.10.2016, Grenoble, France.
Teruzzi, Tiziano and Cadoni, Ezio (2003) Application of a life-time management method on existing concrete structures of 25 scholastic facilities by probabilistic estimation of the residual service life. In: Integrated Lifetime Engineering of Buildings and civil Infrastructures ILCDES2003, 1-3 december 2003, Kuopio, Finland.
Teruzzi, Tiziano and Cadoni, Ezio and Frigeri, Giuliano and Cangiano, Stefano and Plizzari, Giovanni A. (2004) Durability aspects of steel fibre reinforced concrete. In: BEFIB 2004 6th RILEM Symposiumon Fibre-Reinforced Concretes, 20-22 Sept. 2004, Varenna.
Zerbi, Stefano (2018) Senza pietre non c'è arco: due passerelle a confronto. Archi, 5. ISSN 1422-5417
Zhi-qiang, Lu and De-yuan, Li and Diviani, Luca (2014) Strength Analysis of TSCB Pedestrian Bridges Based on Tsai-Wu Failure Criteria. Journal of Guangdong University of Technology, 31 (1). pp. 101-106.