Items where Author is "Ortona, Alberto"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 90.

Pelanconi, Marco and Ortona, Alberto and Zavattoni, Simone and Cornolti, Luca and Barbato, Maurizio and Arrivabeni, Edoardo and Puragliesi, Riccardo and Ferrari, Luca and Gianella, Sandro (2021) Application of Ceramic Lattice Structures to Design Compact, High Temperature Heat Exchangers: Material and Architecture Selection. Materials. ISSN 1996-1944

Ortona, Alberto and Pelanconi, Marco and Colombo, Paolo (2021) Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis. Journal of the European Ceramic Society.

Ortona, Alberto and Santoliquido, Oscar and Camerota, Francesco and Rosa, Alice (2021) A novel device to simply 3D print bulk green ceramic components by stereolithography employing viscous slurries. Open Ceramics.

Ortona, Alberto and Santoliquido, Oscar and Camerota, Francesco (2021) The influence of topology on DLP 3D printing, debinding and sintering of ceramic periodic architectures designed to replace bulky components. Open Ceramics.

Papetti, Viola and Onorati, Maria Giovanna and Ortona, Alberto and Dimopoulos Eggenschwiler, Panayotis (2021) Instationary heat and mass transfer phenomena in additive manufactured open cell polyhedral structures for automotive catalysis. Chemical Engineering Science.

Ortona, Alberto and Kuzhir, Polina and Paddubskaya, Alesia and Bychanok, Dmitry and Liubimau, Aleksandr and Fierro, Vanessa and Celzard, Alain (2020) 3D-printed, carbon-based, lossy photonic crystals: Is high electrical conductivity the must? Carbon.

Rezaei, Ehsan and Barbato, Maurizio and Ortona, Alberto and Haussener, Sophia (2020) Design and optimization of a high-temperature latent heat storage unit. Applied Energy. ISSN 0306-2619

König, Roger and Spaggiari, Marco and Santoliquido, Oscar and Principi, Pamela and Bianchi, Giovanni and Ortona, Alberto (2020) Micropollutant adsorption from water with engineered porous ceramic architectures produced by additive manufacturing and coated with natural zeolite. Journal of Cleaner Production. (In Press)

Rezaei, Ehsan and Barbato, Maurizio and Ortona, Alberto and Gianella, Gianella (2020) Pressure Drop and Convective Heat Transfer in Different SiSiC Structures Fabricated by Indirect Additive Manufacturing. journal of heat transfer.

Pelanconi, Marco and Rezaei, Ehsan and Ortona, Alberto (2020) Cellular ceramic architectures produced by hybrid additive manufacturing: a review on the evolution of their design. Journal of the Ceramic Society of Japan, 128 (9). pp. 595-604. ISSN 1882-0743

Bianchi, Giovanni and Ortona, Alberto and Padovano, Elisa (2019) Graphite-Si-SiC ceramics produced by microwave assisted reactive melt infiltration. Journal of the European Ceramic Society. ISSN 0955-2219

Santoliquido, Oscar and Ortona, Alberto and Colombo, Paolo (2019) Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches. Journal of the European Ceramic Society. ISSN 0955-2219

Spaggiari, Marco and Santoliquido, Oscar and Bianchi, Giovanni and Ortona, Alberto (2019) Formation of CeO2 coatings on Si–SiC foams by electrophoretic deposition and sintering in air. Ceramics International. ISSN 0272-8842

Pelanconi, Marco and Ortona, Alberto and Al-Ketan, Oraib and Al-Rub, Rashid K- Abu (2019) Additive manufacturing of architected catalytic ceramic substrates based on triply periodic minimal surfaces. Journal of the American Ceramic Society. ISSN 1551-2916

Naikade, Manoj and Ortona, Alberto (2019) Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments. Journal of the European Ceramic Society. ISSN 0955-2219

Pelanconi, Marco and Ortona, Alberto and Barbato, Maurizio and Zavattoni, Simone (2019) Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer. Materials & Design.

Pelanconi, Marco and Ortona, Alberto (2019) Nature-Inspired, Ultra-Lightweight Structures with Gyroid Cores Produced by Additive Manufacturing and Reinforced by Unidirectional Carbon Fiber Ribs. Materials, 12 (24). p. 4134. ISSN 1996-1944

Papetti, Viola and Ortona, Alberto and P. Dimopoulos, Eggenschwiler (2018) Additive Manufactured open cell polyhedral structures as substrates for automotive catalysts. International Journal of Heat and Mass Transfer. ISSN 0017-9310

Ortona, Alberto and Bianchi, Giovanni and Cornolti, Luca and Martinelli, Simone (2018) Microwave heating controlled reactive melt infiltration for graphite‐Si‐SiC ceramics manufacturing. Journal of the American Ceramic Society. ISSN 1551-2916

Bianchi, Giovanni and Ortona, Alberto and Vodermayer, Albert (2018) Net shape CMC components produced by composite flow moulding, pyrolysis and reactive silicon infiltration. Ceramics International. ISSN 0272-8842

Ortona, Alberto and Bianchi, Giovanni and Casalegno, Valentina (2018) SiC foam sandwich structures obtained by Mo-wrap joining. Materials Letters. ISSN 0167-577X

Ortona, Alberto and Papetti, Viola and Panayotis Dimopoulos, Panayotis (2018) Additive manufactured open cell structures: Promising substrates for automotive catalysts. 18. Internationales Stuttgarter Symposium.

Ortona, Alberto and Santoliquido, Oscar and Colombo, Paolo and Sorarù, Gian Domenico (2018) Polymer‐derived SiCN cellular structures from replica of 3D printed lattices. Journal of the American Ceramic Society. ISSN 1551-2916

Fino, Debora and Ortona, Alberto (2018) Development of a robust and efficient biogas processor for hydrogen production. Part 2: Experimental campaign. International Journal of Hydrogen Energy.

Ortona, Alberto and Fino, Debora (2017) Development of a robust and efficient biogas processor for hydrogen production. Part 1: Modelling and simulation. International Journal of Hydrogen Energy.

Ortona, Alberto and Santoliquido, Oscar and Bianchi, Giovanni (2017) Additive Manufacturing of Complex Ceramic Architectures. International Conference on Additive Manufacturing in Products and Applications.

Ortona, Alberto and Bianchi, Giovanni and Santoliquido, Oscar and Dimopoulos Eggenschwiler, Panayotis (2017) Additive manufacturing of periodic ceramic substrates for automotive catalyst supports. International Journal of Applied Ceramic Technology. ISSN 1744-7402

Ortona, Alberto and Bianchi, Giovanni and Gianella, Sandro (2017) Design and additive manufacturing of periodic ceramic architectures. Journal of Ceramic Science and Technology.

Ortona, Alberto and Rezaei, Ehsan and Gianella, Sandro and Haussener, Sophia (2016) Early-stage oxidation behavior at high temperatures of SiSiC cellular architectures in a porous burner. Ceramics International.

Ortona, Alberto and Vignoles, Gerard (2016) Numerical study of effective heat conductivities of foams by coupled conduction and radiation. International Journal of Thermal Sciences.

Ortona, Alberto and Barbato, Maurizio and Ferrari, Luca and Gianella, Sandro (2016) Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles. Composite Structures.

Ortona, Alberto and Gianella, Sandro and Burkard, Esser and Barcena, Jorge (2016) Innovative Thermal Management Concepts and Material Solutions for Future Space Vehicles. Journal of Spacecraft and Rockets. ISSN 0022-4650

Ortona, Alberto and Sergi, Danilo and Camarano, Antonio and Narciso, Javier (2016) Surface growth for molten silicon infiltration into carbon millimeter-sized channels: Lattice–Boltzmann simulations, experiments and models. International Journal of Modern Physics C. ISSN 0217-9792

Ortona, Alberto and Sergi, Danilo and Grossi, Loris and Leidi, Tiziano (2016) Simulation of capillary infiltration into packing structures for the optimization of ceramic materials using the lattice Boltzmann method. Engineering Applications of Computational Fluid Mechanics. ISSN 1994-2060

Ortona, Alberto and Sergi, Danilo and Caccia, Mario and Camarano, Antonio and Narciso, Javier (2015) Wetting and Navier-Stokes equation—The manufacture of composite materials. Wetting and Wettability.

Ortona, Alberto and Bianchi, Giovanni and Vavassori, Paolo (2015) Reactive silicon infiltration of carbon bonded preforms embedded in powder field modifiers heated by microwaves. Ceramics International. ISSN 0272-8842

Ortona, Alberto and Ferrari, Luca and Rezaei, Ehsan (2015) Electromagnetic properties of periodic carbon architectures at high frequencies. 2015 International Conference on Electromagnetics in Advanced Applications (ICEAA).

Ortona, Alberto and Yoon, Dang-Hyok and Fend, Thomas and Feckler, Gereon and Smirnova, Olena (2015) Tubular Si-infiltrated SiCf/SiC composites for solar receiver application–Part 2: Thermal performance analysis and prediction. Solar Energy Materials and Solar Cells.

Ortona, Alberto and Yoon, Dang-Hyok and Fend, Thomas and Feckler, Gereon and Smirnova, Olena (2015) Tubular Si-infiltrated SiC f/SiC composites for solar receiver application--Part 2: Thermal performance analysis and prediction. Solar Energy Materials & Solar Cells, 140. pp. 382-387. ISSN 0927-0248

Ortona, Alberto and Bianchi, Giovanni and Barbato, Maurizio and Gianella, Sandro and Scocchi, Giulio and Aronovici, Maud (2015) Heat and Mass Transfer in Ceramic Lattices During High‐Temperature Oxidation. Journal of the American Ceramic Society. ISSN 1551-2916

Ortona, Alberto and Fend, Thomas and Yoon, Dang-Hyok and Yu, Hyun-Woo and Raju, Kati (2015) Tubular Si-infiltrated SiCf/SiC composites for solar receiver application—Part 1: Fabrication by replica and electrophoretic deposition. Solar Energy Materials and Solar Cells.

Szczurek, Anna and Ortona, Alberto and Ferrari, Luca and Rezaei, Ehsan and Medjahdi, Ghouti and Fierro, Vanessa and Bychanok, Dmitry and Kuzhir, Polina and Celzard, Alain (2015) Carbon periodic cellular architectures. Carbon, 88. pp. 70-85.

Aronovici, Maud and Bianchi, Giovanni and Ferrari, Luca and Barbato, Maurizio and Gianella, Sandro and Scocchi, Giulio and Ortona, Alberto (2015) Heat and Mass Transfer in Ceramic Lattices During High-Temperature Oxidation. Journal of the American Ceramic Society.

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2015) Lattice Boltzmann simulations on the role of channel structure for reactive capillary infiltration. Engineering Applications of Computational Fluid Mechanics (ahead-). pp. 1-23.

Ortona, Alberto and Rezaei, Ehsan and Bianchi, Giovanni and Gianella, Sandro (2014) Reticulated Ceramics Under Bending: the Non‐Linear Regime Before Their Catastrophic Failure. Advances in Bioceramics and Porous Ceramics VII: A Collection of Papers Presented at the 38th International Conference on Advanced Ceramics and Composites January 27–31, 2014 Daytona Beach, Florida.

Ortona, Alberto and Rezaei, Ehsan and Herrmann, Andreas and Fino, Debora (2014) Development of an autothermal biogas processor for hydrogen production. Proc. of the International Gas Union Research Conference (IGRC 2014). Copenhagen, Denmark.

Rezaei, Ehsan and Bianchi, Giovanni and Gianella, Sandro and Ortona, Alberto (2014) On the nonlinear mechanical behavior of macroporous cellular ceramics under bending. Journal of the European Ceramic Society, 34 (10). pp. 2133-2141. ISSN 0955-2219

Ortona, Alberto and Fend, Thomas and Yu, Hyun-Woo and Raju, Kati and Yoon, Dang-Hyok (2014) Fabrication of cylindrical SiCf/Si/SiC-based composite by electrophoretic deposition and liquid silicon infiltration. Journal of the European Ceramic Society. ISSN 0955-2219

D'Amico, Giuseppe Claudio and Ortona, Alberto and Biamino, Sara and Fino, Paolo and Badini, Claudio and D'Angelo, Claudio (2014) Oxidation Behavior at 1600°C of Si-SiC-ZrB2 Composites Produced by Si Reactive Infiltration. Advanced Engineering Materials, 16 (2). pp. 176-183. ISSN 1527-2648

Ortona, Alberto and Fino, Paolo and Badini, Claudio and D'Angelo, Claudio (2014) Oxidation Behavior at 1600 °C of Si‐SiC‐ZrB2 Composites Produced by Si Reactive Infiltration. Advanced Engineering Materials. ISSN 1527-2648

Ortona, Alberto and Scocchi, Giulio and Barcena, Jorge and Lagos, Miguel A (2014) Spark plasma sintering of ZrB2–SiC composites with in-situ reaction bonded silicon carbide. Ceramics International. ISSN 0272-8842

Ortona, Alberto and Lagos, Miguel A and Scocchi, Giulio and Barcena, Jorge (2014) Spark plasma sintering of ZrB 2--SiC composites with in-situ reaction bonded silicon carbide. Ceramics International, 40 (1A). pp. 821-826. ISSN 0272-8842

Ortona, Alberto and Ferrari, Luca and Barbato, Maurizio and D'Angelo, Claudio (2014) Convective heat transfer in cellular ceramic: A 3D numerical solution. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics.

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2014) Lattice Boltzmann simulations on the role of channel structure for reactive capillary infiltration. arXiv preprint arXiv:1409.0954.

Ortona, Alberto and Rezaei, Ehsan (2014) Modeling the properties of cellular ceramics: from foams to lattices and back to foams. [["eprint_typename_conference\_item" not defined]]

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2014) Surface growth effects on reactive capillary-driven flow: Lattice Boltzmann investigation. Engineering Applications of Computational Fluid Mechanics, 8 (4). 549 - 561. ISSN 1994-2060

D'Angelo, Claudio and Ortona, Alberto and Colombo, Paolo (2013) Influence of the loading direction on the mechanical behavior of ceramic foams and lattices under compression. Acta Materialia, 61 (14). pp. 5525-5534. ISSN 1359-6454

Ortona, Alberto and Scocchi, Giulio and Grossi, Loris and Bianchi, Giovanni and D'Angelo, Claudio and Leidi, Tiziano and Gilardi, Raffaele (2013) Evaluation of a simple finite element method for the calculation of effective electrical conductivity of compression moulded polymer–graphite composites. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X

Ortona, Alberto and Badini, Claudio and Liedtke, Volker and Wilhelmi, Christian and D'Angelo, Claudio and Gaia, Daniele and Fischer, Wolfgang (2013) Hetoroporous heterogeneous ceramics for reusable thermal protection systems. Journal of Materials Research, 28 (17). pp. 2273-2280.

Ortona, Alberto and Trimis, Dimosthenis and Gianella, Sandro and Fino, Paolo and Boulet, Emmanuel and Uhlig, Volker and Eder, Robert and Chazelas, Claire and Grämer , Tobias and D'Amico, Giuseppe Claudio (2013) SiSiC Heat Exchangers for Recuperative Gas Burners with Highly Structured Surface Elements. International Journal of Applied Ceramic Technology, 11 (5). ISSN 1744-7402

Ortona, Alberto and Pusterla, Simone and Pizzi, Antonio and Fierro, Vanessa (2013) Structure and oxidation resistance of micro-cellular Si–SiC foams derived from natural resins. Ceramics International. ISSN 0272-8842

Amaral-Labat, G and Zollfrank, C and Ortona, Alberto and Pusterla, Simone and Pizzi, Antonio and Fierro, Vanessa and Celzard, Alain (2013) Structure and oxidation resistance of micro-cellular Si-SiC foams derived from natural resins. Ceramics International, 39 (2). pp. 1841-1851. ISSN 0272-8842

Ortona, Alberto and Gaia, Daniele and Gianella, Sandro (2012) High Temperature Applications of Si- SiC Cellular Ceramics. Advanced Engineering Materials. ISSN 1527-2648

Pusterla, Simone and Barbato, Maurizio and Ortona, Alberto and D'Angelo, Claudio (2012) Numerical study of cell morphology effects on convective heat transfer in reticulated ceramics. International Journal of Heat and Mass Transfer, 55 (25-26). pp. 7902-7910. ISSN 0017-9310

Pusterla, Simone and Ortona, Alberto and D'Angelo, Claudio and Barbato, Maurizio (2012) The influence of cell morphology on the effective thermal conductivity of reticulated ceramic foams. Journal of Porous Materials, 19 (3). pp. 307-315. ISSN 1380-2224

Sergi, Danilo and D'Angelo, Claudio and Scocchi, Giulio and Ortona, Alberto (2012) Random Packing of Small Blocks: Pressure Effects, Orientational Correlations and Application to Polymer-Based Composites. Particle & Particle Systems Characterization, 29 (1). pp. 24-34. ISSN 1521-4117

Ortona, Alberto and Fino, Paolo and D'Angelo, Claudio and Biamino, Sara and D'Amico, Giuseppe Claudio and Gaia, Daniele and Gianella, Sandro (2012) Si-SiC-ZrB2 ceramics by silicon reactive infiltration. Ceramics International, 38 (4). pp. 3243-3250. ISSN 0272-8842

Ortona, Alberto and D'Angelo, Claudio and Bianchi, Giovanni (2012) Monitoring sandwich structured SiC ceramics integrity with electrical resistance. NDT & E International, 46. pp. 77-82. ISSN 0963-8695

D'Angelo, Claudio and Ortona, Alberto (2012) Cellular Ceramics Produced by Replication: A Digital Approach. Advanced Engineering Materials, 14 (12). pp. 1104-1109. ISSN 14381656

Ortona, Alberto and D'Angelo, Claudio and Gianella, Sandro and Gaia, Daniele (2012) Cellular ceramics produced by rapid prototyping and replication. Materials Letters, 80. pp. 95-98. ISSN 0167577X

Sergi, Danilo and Scocchi, Giulio and Ortona, Alberto (2012) Coarse-graining MARTINI model for molecular-dynamics simulations of the wetting properties of graphitic surfaces with non-ionic, long-chain, and T-shaped surfactants. The Journal of Chemical Physics, 137 (9). 094904. ISSN 0021-9606

Leidi, Tiziano and Scocchi, Giulio and Grossi, Loris and Pusterla, Simone and D’Angelo, Claudio and Thiran, Jean-Philippe and Ortona, Alberto (2012) Computing effective properties of random heterogeneous materials on heterogeneous parallel processors. Computer Physics Communications, 183 (11). pp. 2424-2433. ISSN 00104655

D’Angelo, Claudio and Ortona, Alberto and Colombo, Paolo (2012) Finite element analysis of reticulated ceramics under compression. Acta Materialia, 60 (19). pp. 6692-6702. ISSN 13596454

Sergi, Danilo and Scocchi, Giulio and Ortona, Alberto (2012) Molecular dynamics simulations of the contact angle between water droplets and graphite surfaces. Fluid Phase Equilibria, 332. pp. 173-177. ISSN 03783812

Ortona, Alberto and Pusterla, Simone and Gianella, Sandro (2011) An integrated assembly method of sandwich structured ceramic matrix composites. Journal of the European Ceramic Society, 31 (9). pp. 1821-1826. ISSN 0955-2219

Scocchi, Giulio and Sergi, Danilo and D'Angelo, Claudio and Ortona, Alberto (2011) Wetting and contact-line effects for spherical and cylindrical droplets on graphene layers: A comparative molecular-dynamics investigation. Physical Review E, 84 (6). 061602. ISSN 2470-0053

Ortona, Alberto (2011) Ceramic matrix composites: reaction bonded. Wiley Encyclopedia of Composites.

Trimis, Dimosthenis and Uhlig, Volker and Eder, Robert and Ortona, Alberto and Pusterla, Simone and Ambrosio, Elisa Paola and Fino, Paolo and Rumeau, Pascal and Chazelas, Claire and Giannella, Sandro (2011) New ceramic heat exchangers with enhanced heat transfer properties for recuperative gas burners. Heat Processing, 9 (2). pp. 183-187. ISSN 1611-616X

Ortona, Alberto and Pusterla, Simone and Fino, Paolo and Mach, FRA and Delgado, A and Biamino, Sara (2010) Aging of reticulated Si-SiC foams in porous burners. Advances in Applied Ceramics, 109 (4). pp. 246-251. ISSN 1743-6753

Pavese, Matteo and Fino, Paolo and Badini, Claudio and Ortona, Alberto and Marino, Giuliano (2008) HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties. Surface and Coatings Technology, 202 (10). pp. 2059-2067. ISSN 0257-8972

Pavese, Matteo and Fino, Paolo and Ortona, Alberto and Badini, Claudio (2008) Potential of SiC multilayer ceramics for high temperature applications in oxidising environment. Ceramics International, 34 (1). pp. 197-203. ISSN 0272-8842

Mach, FRA and Von Issendorff, Franz and Delgado, Antonio and Ortona, Alberto (2008) Experimental Investigation of the Oxidation Behavior of SiSiC Foams. Ceramic Engineering and Science Proceedings, 29 (7). pp. 299-311. ISSN 1940-6339

Nannetti, Carlo Alberto and Borello, A and De Pinto, DA and Carbonetti, Daniela and Licciulli, Antonio and Ortona, Alberto (2006) C fiber reinforced ceramic matrix composites by a combination of CVI, PIP and RB. High Temperature Ceramic Matrix Composites. pp. 368-374.

Nannetti, Carlo Alberto and Ortona, Alberto and Pinto, Dario A and Riccardi, Bruno (2004) Manufacturing SiC-fiber-reinforced SiC matrix composites by improved CVI/slurry infiltration/polymer impregnation and pyrolysis. Journal of the American Ceramic Society, 87 (7). pp. 1205-1209. ISSN 1551-2916

Nannetti, Carlo Alberto and Riccardi, Bruno and Ortona, Alberto and La Barbera, Aurelio and Scafè, E and Vekinis, George (2002) Development of 2D and 3D Hi-Nicalon fibres/SiC matrix composites manufactured by a combined CVI--PIP route. Journal of nuclear materials, 307 (2). pp. 1196-1199. ISSN 0022-3115

Badini, Claudio and Fino, Paolo and Ortona, Alberto and Amelio, C (2002) High temperature oxidation of multilayered SiC processed by tape casting and sintering. Journal of the European Ceramic Society, 22 (12). pp. 2071-2079. ISSN 0955-2219

Badini, Claudio and Fino, Paolo and Rosso, I and Ortona, Alberto (2002) High temperature oxidation of SiC/C/SiCf and SiC/BN/SiCf composites. Materials Engineering, 13 (1). pp. 15-32.

Ortona, Alberto and Donato, A and Filacchioni, G and De Angelis, U and La Barbera, Aurelio and Nannetti, Carlo Alberto (2000) SiC-SiC f CMC manufacturing by hybrid CVI-PIP techniques: process optimisation. Fusion Engineering and Design, 51-52. pp. 159-163. ISSN 0920-3796

Licciulli, Antonio and De Riccardis, F and Quirini, Angelo and Nannetti, Carlo Alberto and Filacchioni, G and Pilloni, Luciano and Bottinelli, Stefano and Ortona, Alberto and Cammarota, A (1996) Preparation and characterization of SiC/C/SiC composites by hybrid wet/vapour processing. Key Engineering Materials, 127. pp. 279-286. ISSN 1013-9826

Ortona, Alberto and Holmes, Scott T. and Steiner, Karl V. and Gillespie Jr, John (1991) On-Line Sensing of the Resistance Welding Process for Thermoplastic Composites Using Acoustic Emission. Proceedings of the American Society for Composites. Sixth Technical Conference. Composite Materials, Mechanics and Processing. pp. 174-182.

This list was generated on Sun Sep 26 12:39:09 2021 CEST.