Items where Author is "Forni, Daniele"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 94.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2023) Influence of the gauge length on dynamic direct tensile test. Procedia Structural Integrity, 47. pp. 630-635.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2023) UHP(FR)C under impact loading. Procedia Structural Integrity, 47. pp. 331-336.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2023) Combined effects of high strain rate, elevated temperature, and triaxiality on a commercial tungsten alloy. Procedia Structural Integrity, 47. pp. 268-273.

Forni, Daniele and Briccola, Deborah and Dotta, Matteo and Tesio, Nicoletta and Cadoni, Ezio (2023) High and Very-High Strength Steels under harsh conditions of temperature and loading. Procedia Structural Integrity, 47. pp. 348-353.

Cadoni, Ezio and Briccola, Deborah and Dotta, Matteo and Forni, Daniele (2022) Dynamic Behaviour of Two UHPC Matrixes in Direct Tension. ACI Symposium Publication, 355. pp. 11-18.

Forni, Daniele and Mazzucato, Federico and Valente, Anna and Cadoni, Ezio (2022) Additively manufactured Ni-based Inconel 718 alloy behaviour under harsh conditions ofstrain-rate and temperature. In: Dynamic Behaviour of Additively Manufactured Structures & Materials UNSPECIFIED.

Cadoni, Ezio and Briccola, Deborah and Dotta, Matteo and Forni, Daniele (2022) Combined effect of elevated temperature and high strain rates on S690QL high strength steel. Journal of Constructional Steel Research, 199. p. 107519.

Peroni, Marco and Tsionis, George and Solomos, George and Cadoni, Ezio and Knobloch, Markus and Fontana, Mario and Forni, Daniele and Dotta, Matteo (2022) SUSHI - Steel Under Severe High Impact. Technical Report Publications Office of the European Union , Luxembourg (Luxembourg).

Cadoni, Ezio and Forni, Daniele (2021) Mechanical behaviour of B500A rebars: effect of elevated temperature and high strain-rate. Fire Safety Journal (103321).

Napolitano, Rosanna and Forni, Daniele and Menna, Costantino and Asprone, Domenico and Cadoni, Ezio (2021) Dynamic characterization of the layer-interface properties of 3D-printed concrete elements. Case Studies in Construction Materials, 15. e00780. ISSN 2214-5095

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2021) Effects of elevated temperature on a tungsten alloy at high strain-rate. EPJ Web Conf., 250. ISSN 2100-014X

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2021) Experimental investigation on the response of UHP(FR)C at high stress-rates under compression. EPJ Web Conf., 250.

Forni, Daniele and Mazzucato, Federico and Valente, Anna and Cadoni, Ezio (2021) High strain-rate behaviour of as-cast and as-build Inconel 718 alloys at elevated temperatures. Mechanics of Materials. p. 103859.

Mazzucato, Federico and Forni, Daniele and Valente, Anna and Cadoni, Ezio (2021) Laser Metal Deposition of Inconel 718 Alloy and As-built Mechanical Properties Compared to Casting. Materials, 14 (2). p. 437.

Napolitano, Rosanna and Menna, Costantino and Forni, Daniele and Asprone, Domenico and Cadoni, Ezio (2021) Mechanical characterization of 3D printed concrete subjected to dynamic loading. EPJ Web Conf., 250. 01009.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2021) Modern high strength steels under high strain-rate regimes. EPJ Web Conf., 250.

Cadoni, Ezio and Forni, Daniele and Mazzucato, Federico and Valente, Anna (2021) Tensile behaviour of Inconel 718 alloys under extreme conditions of temperature and strain-rate. EPJ Web Conf., 250.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2020) High strain-rate behaviour of a Tungsten alloy. Procedia Structural Integrity, 28. 964 - 970.

Cadoni, Ezio and Forni, Daniele (2020) Strain-rate effects on S690QL high strength steel under tensile loading. Journal of Constructional Steel Research.

Napolitano, Rosanna and Menna, Costantino and Forni, Daniele and Asprone, Domenico and Cadoni, Ezio (2020) Dynamic Behaviour of Layered 3D Printed Concrete Elements. RILEM Bookseries, 28. pp. 478-488.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2020) Dynamic response of UHPFRCs in direct-shear tests. Procedia Structural Integrity, 28. 933 - 942.

Cadoni, Ezio and Forni, Daniele (2019) Mechanical behaviour of a very-high strength steel (S960QL) under extreme conditions of high strain rates and elevated temperatures. Fire Safety Journal, 109. ISSN 0379-7112

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2019) Dynamic Behaviour of UHPFRC Under High Strain-Rate. In: Modern Developments in Performance of Structures Under Extreme Loading Proceedings of PROTECT 2019, September 16-17, 2019, Whistler, BC, Canada.

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2019) Structural Robustness: The Role of the Mechanical Characterization of Materials Under Extreme Loadings. In: Modern Developments in Performance of Structures Under Extreme Loading UNSPECIFIED.

Cadoni, Ezio and Forni, Daniele (2019) High strain-rate response of UHPFRC in support of impact resistant structural design. In: 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X, 24-26 giugno 2019, Bayonne (F).

Cadoni, Ezio and Forni, Daniele (2019) Austenitic Stainless Steel Under Extreme Combined Conditions of Loading and Temperature. Journal of Dynamic Behavior of Materials. ISSN 2199-7454

Cadoni, Ezio and Forni, Daniele and Bonnet, Emmanuel and Svatopluk Dubrusky, Svatopluk Dubrusky (2019) Experimental study on direct tensile behaviour of UHPFRC under high strain-rates. Construction and Building Materials, 218. pp. 667-680. ISSN 0950-0618

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., 183. 02005.

Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2018) Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC). EPJ Web Conf., 183. 02015.

Coppola, Luigi and Coffetti, Denny and Crotti, Elena and Forni, Daniele and Cadoni, Ezio (2018) Fiber reinforced mortars based on free Portland-CSA binders under high stress rate. EPJ Web Conf., 183. 04013.

Cadoni, Ezio and Fontana, Mario and Forni, Daniele and Knobloch, Markus (2018) High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures. The European Physical Journal Special Topics, 227 (1). pp. 179-199.

Cadoni, Ezio and Forni, Daniele and Gieleta, Roman and Kruszka, Leopold (2018) Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates. The European Physical Journal Special Topics, 227 (1). pp. 29-43.

Luccioni, Bibiana and Isla, Facundo and Forni, Daniele and Cadoni, Ezio (2018) Modelling UHPFRC tension behavior under high strain rates. Cement and Concrete Composites, 91. pp. 209-220.

Fenu, Luigi and Aymerich, Francesco and Francesconi, Luca and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2018) Dynamic behaviour of an earthen material under different impact loading conditions. EPJ Web Conf., 183. 02014.

Dobruský, Svatopluk and Forni, Daniele and Cadoni, Ezio (2018) Response of UHPFRCs in Tension under High Stress Rate. EPJ Web Conf., 183. 04003.

Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2017) Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading. Cement and Concrete Research, 102. pp. 16-28.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo (2017) Dynamic behaviour of UHPC in compression by means of 3D-Modified Hopkinson Bar. In: Proceedings of 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017) 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), 29.11.2017-01.12.2017, Melbourne.

Dobruský, Svatopluk and Forni, Daniele and Cadoni, Ezio (2017) Mechanical Characterization of UHPC at High Strain Rate. In: 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), 29.11.2017-01.12.2017, Melbourne.

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2017) Effetti combinati di temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In: Ingegneria forense, crolli affidabilità strutturale e consolidamento IFCRASC17, 14.09.2017-16.09.2017, Politecnico di Milano.

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2017) Blast effects on steel columns under fire conditions. Journal of Constructional Steel Research, 136. pp. 1-10.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2017) Analysis of the Materials Behaviour at High Strain-Rate in Support of Impact Resistant Structural Design. In: 7th International Conference on Advances in Experimental Structural Engineering, 06.09.2017-08.09.2017, Pavia.

Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2017) Influence of Fiber Type on the Tensile Behavior of Strain-Hardening Cement-Based Composites (SHCC) Under Impact Loading. In: Strain-Hardening Cement-Based Composites. Springer, pp. 257-265.

Forni, Daniele (2017) Progressive collapse induced by fire and blast. PhD thesis, Politecnico di Torino.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, 197. pp. 168-175. ISSN 1877-7058

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) Strain rate behaviour in tension of S355 steel: Base for progressive collapse analysis. Engineering Structures, 119. pp. 164-173. ISSN 0141-0296

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, 2. pp. 986-993. ISSN 2452-3216

Fenu, Luigi and Forni, Daniele and Cadoni, Ezio (2016) Dynamic behaviour of cement mortars reinforced with glass and basalt fibres. Composites Part B: Engineering, 92 (5). pp. 142-150.

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) High strain rate response of S355 at high temperatures. Materials and Design, 94. pp. 467-478. ISSN 0261-3069

Fenu, Luigi and Congiu, E. and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2016) Comparison between the dynamic behaviour of cement mortars reinforced with glass and basalt fibres. In: ITALIAN CONCRETE DAYS. EVOLUZIONE E SOSTENIBILITÀ DELLE STRUTTURE IN CALCESTRUZZO, 27.10.2016-28.10.2016, Rome, Italy.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2016) Effect of the high temperature on the high strain rate behaviour of an austenitic stainless steel. In: 1st International Conference on Impact Loading of Structures and Materials, 22.05.2016-26.05.2016, Torino, Italy.

Cadoni, Ezio and Forni, Daniele (2016) Experimental analysis of the UHPFRCs behavior under tension at high stress rate. The European Physical Journal Special Topics, 225. pp. 1-12.

Forni, Daniele and Cadoni, Ezio (2016) Experimental and numerical analysis of S355 steel under extreme coupled effect of high temperatures and high strain rates. In: DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 06.07.2016-07.07.2016, S.M. Tucuman, Argentine. (Unpublished)

Curosu, Iurie and Mechtcherine, Viktor and Forni, Daniele and Cadoni, Ezio (2016) Influence of fibre type on the tensile behaviour of strain-hardening cement-based composites (SHCC) under impact loading. In: 22nd DYMAT Technical Meeting, 19.10.2016-21.10.2016, Grenoble, France.

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) Mechanical properties of S355 under extreme coupled effect of high temperatures and high strain rates. In: UNSPECIFIED.

Luccioni, Bibiana and Isla, Facundo and Forni, Daniele and Cadoni, Ezio (2016) Modelado de Hormigones de Ultra Altas Prestaciones Reforzados con Fibras bajo Altas Velocidades de Deformación. Mecánica Computacional, XXXIV. pp. 199-223. ISSN 1666-6070

Cadoni, Ezio and Singh, Nilamber Kumar and Forni, Daniele and Singha, Maloy Kumar and Gupta, Narinder Kumar (2016) Strain rate effects on the mechanical behavior of two Dual Phase steels in tension. The European Physical Journal Special Topics, 225. pp. 1-12.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2016) Tensile behaviour of reinforcing steels at high strain rate and high temperature. Key Engineering Materials, 711. pp. 791-798. ISSN 1013-9826

Forni, Daniele and Chiaia, Bernardino and Cadoni, Ezio (2016) The effect of high strain rate on tensile properties of S355 steel at high temperature. In: Zingoni, Alphose, (ed.) Taylor & Francis Group, London. ISBN 978-1-138-02927-9

Bragov, Anatoly M. and Konstantinov, Alexander and Lomunov, Andrey and Forni, Daniele and Riganti, Gianmario and Cadoni, Ezio (2015) High strain rate response of UHP(FR)C in compression. EPJ Web of Conferences, 94. ISSN 2101-6275

Fenu, Luigi and Forni, Daniele and Cadoni, Ezio (2015) Energy absorption at high strain rate of glass fiber reinforced mortars. EPJ Web of Conferences, 94. 01030. ISSN 2101-6275

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Kaufmann, Hanspeter (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Albertini, Carlo (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.

Latella, Claudia and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2015) Influence of strain rate on the mechanical behaviour in tension of bovine cortical bone. EPJ Web of Conferences, 94. 03001. ISSN 2101-6275

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2015) Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate. EPJ Web of Conferences, 94. 01022. ISSN 2101-6275

Cadoni, Ezio and Forni, Daniele (2015) Strain rate effects on reinforcing steels in tension. European Journal de Physique WoC, 94 (01004).

Menna, Costantino and Asprone, Domenico and Forni, Daniele and Roviello, Giuseppina and Ricciotti, Laura and Ferone, Claudio and Bozza, Anna and Prota, Andrea and Cadoni, Ezio (2015) Tensile behaviour of geopolymer-based materials under medium and high strain rates. EPJ Web of Conferences, 94. 01034. ISSN 2101-6275

Cadoni, Ezio and Forni, Daniele (2015) High strain rate behaviour in tension of different reinforcing steels. In: Kodur, V.H.R and Banthia, N.K., (eds.) DEStech, Lancaster - PA - USA. ISBN 978-1-60595-227-7

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2015) High strain rate behaviour in tension of steel B500A reinforcing bar. Materials and Structures, 48 (6). pp. 1803-1813. ISSN 1359-5997

Grazka, Michal and Janiszewski, Jacek and Kruszka, Leopold and Cadoni, Ezio and Forni, Daniele and Riganti, Gianmario (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, 566. pp. 97-103. ISSN 1660-9336

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Albertini, Carlo (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, 49 (8). pp. 657-666.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. In: UNSPECIFIED, 22-24 April, 2013, Tel Aviv.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano and Kaufmann, Hanspeter (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, 26. 05004.

Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, 26. 01021.

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In: Proceedings of XI Convegno Nazionale AIMAT Proceedings of XI Convegno Nazionale AIMAT, 16 – 19 settembre 2012, Gaeta (LT).

Cadoni, Ezio and Fenu, Luigi and Forni, Daniele (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, 35. 399 - 407.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, 414 (3). 360 - 366.

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, 82. pp. 190-195.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, 82. pp. 124-129.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, 82. pp. 86-91.

Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey and Ripamonti, Antonio (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, 59 (2). pp. 101-117.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spätig, Philippe (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. In: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications and 1st International Conference on Fusion Energy Materials Science, Rosemberg.

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Performance of multi-scale fiber reinforced cement composites at high strain rate. In: The new boundaries of structural concrete UNSPECIFIED, 15-16 Settembre 2011, Ancona.

Spaetig, Philippe and Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In: IEA Workshop on Fusion Materials Modeling IEA Workshop on Fusion Materials Modeling 2011, April 20-22, Lawrence Livermore National Laboratory, April 20-22, 2011, Lawrence Livermore National Laboratory.

Cadoni, Ezio and Antonietti, Samuel and Dotta, Matteo and Forni, Daniele (2011) Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, 59 (3). pp. 197-210.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Caverzan, Alessio and di Prisco, Marco (2010) Advanced cementitious composites in the design and construction of safe tunnels. In: Structural Concrete in Switzerland. FIB-CH, pp. 12-15.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2010) Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In: Structural Concrete in Switzerland. FIB-CH, pp. 28-31.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. In: Failure and damage mechanisms of armour materials, 26 November 2010, Madrid.

Cadoni, Ezio and Forni, Daniele (2010) Mechanical behaviour of Basalt Fiber Reinforced Cementitius Composite under quasi static, medium and high strain rate. Technical Report UNSPECIFIED

Cadoni, Ezio and Asprone, Domenico and Dotta, Matteo and Forni, Daniele and Prota, Andrea and Manfredi, Gaetano (2009) Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In: Structures under extreme loading. National Defence Academy - Japan.

Cadoni, Ezio and Albertini, Carlo and Dotta, Matteo and Forni, Daniele and Giorgetti, Paolo and Riganti, Gianmario (2009) Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In: Rock fragmentation by blasting. Taylor & Francis Group, Granada, pp. 35-41. ISBN 978-0-415-48296-7

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Meda, Alberto and Plizzari, Giovanni A. (2009) Rate Effects of High Performance Fibre Reinforced Cementitius Composite under tensile loading. In: Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, pp. 809-815. ISBN 978-2-7598-0472-6

Cadoni, Ezio and Albertini, Carlo and Forni, Daniele (2008) Impact behaviour of materials: a tool for the de-sign of rockfall protective shelters. In: Interdisciplinary Workshop on Rock Fall Protection, June 23-25, 2008, Morschach, Switzerland.

Cadoni, Ezio and Forni, Daniele and Botturi, Luca (2008) Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers. TechTrends, Volume (5). pp. 17-21. ISSN 1559-7075

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo and D'Aiuto, Fabio and Federici, Claudio and Maggi, Stefano (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In: Impact Loading of Lightweight Structures Impact Loading of Lightweight Structures, 17-19 June 2008, Trondheim, Norway.

This list was generated on Wed Oct 4 19:28:02 2023 CEST.