 | Up a level |
Cuomo, Maurizio and König, Roger and Zanardini, Elisabetta and Di Guardo, Antonio and Bianchi, Giovanni and Ortona, Alberto and Principi, Pamela (2023) Using zeolite filters to reduce activated carbon use in micropollutant removal from wastewater. Journal of Water Process Engineering.
Pelanconi, Marco and Bianchi, Giovanni and Colombo, Paolo and Ortona, Alberto (2021) Fabrication of dense SiSiC ceramics by a hybrid additive manufacturing process. Journal of the American Ceramic Society. ISSN 1551-2916
König, Roger and Spaggiari, Marco and Santoliquido, Oscar and Principi, Pamela and Bianchi, Giovanni and Ortona, Alberto (2020) Micropollutant adsorption from water with engineered porous ceramic architectures produced by additive manufacturing and coated with natural zeolite. Journal of Cleaner Production. (In Press)
Bianchi, Giovanni and Ortona, Alberto and Padovano, Elisa (2019) Graphite-Si-SiC ceramics produced by microwave assisted reactive melt infiltration. Journal of the European Ceramic Society. ISSN 0955-2219
Spaggiari, Marco and Santoliquido, Oscar and Bianchi, Giovanni and Ortona, Alberto (2019) Formation of CeO2 coatings on Si–SiC foams by electrophoretic deposition and sintering in air. Ceramics International. ISSN 0272-8842
Ortona, Alberto and Bianchi, Giovanni and Cornolti, Luca and Martinelli, Simone (2018) Microwave heating controlled reactive melt infiltration for graphite‐Si‐SiC ceramics manufacturing. Journal of the American Ceramic Society. ISSN 1551-2916
Bianchi, Giovanni and Ortona, Alberto and Vodermayer, Albert (2018) Net shape CMC components produced by composite flow moulding, pyrolysis and reactive silicon infiltration. Ceramics International. ISSN 0272-8842
Ortona, Alberto and Bianchi, Giovanni and Casalegno, Valentina (2018) SiC foam sandwich structures obtained by Mo-wrap joining. Materials Letters. ISSN 0167-577X
Ortona, Alberto and Santoliquido, Oscar and Bianchi, Giovanni (2017) Additive Manufacturing of Complex Ceramic Architectures. International Conference on Additive Manufacturing in Products and Applications.
Ortona, Alberto and Bianchi, Giovanni and Santoliquido, Oscar and Dimopoulos Eggenschwiler, Panayotis (2017) Additive manufacturing of periodic ceramic substrates for automotive catalyst supports. International Journal of Applied Ceramic Technology. ISSN 1744-7402
Ortona, Alberto and Bianchi, Giovanni and Gianella, Sandro (2017) Design and additive manufacturing of periodic ceramic architectures. Journal of Ceramic Science and Technology.
Ortona, Alberto and Bianchi, Giovanni and Vavassori, Paolo (2015) Reactive silicon infiltration of carbon bonded preforms embedded in powder field modifiers heated by microwaves. Ceramics International. ISSN 0272-8842
Ortona, Alberto and Bianchi, Giovanni and Barbato, Maurizio and Gianella, Sandro and Scocchi, Giulio and Aronovici, Maud (2015) Heat and Mass Transfer in Ceramic Lattices During High‐Temperature Oxidation. Journal of the American Ceramic Society. ISSN 1551-2916
Aronovici, Maud and Bianchi, Giovanni and Ferrari, Luca and Barbato, Maurizio and Gianella, Sandro and Scocchi, Giulio and Ortona, Alberto (2015) Heat and Mass Transfer in Ceramic Lattices During High-Temperature Oxidation. Journal of the American Ceramic Society.
Ortona, Alberto and Rezaei, Ehsan and Bianchi, Giovanni and Gianella, Sandro (2014) Reticulated Ceramics Under Bending: the Non‐Linear Regime Before Their Catastrophic Failure. Advances in Bioceramics and Porous Ceramics VII: A Collection of Papers Presented at the 38th International Conference on Advanced Ceramics and Composites January 27–31, 2014 Daytona Beach, Florida.
Rezaei, Ehsan and Bianchi, Giovanni and Gianella, Sandro and Ortona, Alberto (2014) On the nonlinear mechanical behavior of macroporous cellular ceramics under bending. Journal of the European Ceramic Society, 34 (10). pp. 2133-2141. ISSN 0955-2219
Ortona, Alberto and Scocchi, Giulio and Grossi, Loris and Bianchi, Giovanni and D'Angelo, Claudio and Leidi, Tiziano and Gilardi, Raffaele (2013) Evaluation of a simple finite element method for the calculation of effective electrical conductivity of compression moulded polymer–graphite composites. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X
Ortona, Alberto and D'Angelo, Claudio and Bianchi, Giovanni (2012) Monitoring sandwich structured SiC ceramics integrity with electrical resistance. NDT & E International, 46. pp. 77-82. ISSN 0963-8695
Diviani, Luca and Ferri, Emanuele and Bianchi, Giovanni and Cau, N and Poli, M and Bonfiglio, P and Guanella, J.C. (2010) Innovative concept for High Precision Grinding Center. In: International Conference on Concurrent Enterprising (ICE 2010).
Pelanconi, Marco and Bianchi, Giovanni and bottacin, samuele and Ortona, Alberto (2023) New, 3D binder-jetted carbons with minimal periodic surface structures. Carbon. ISSN ISSN 0008-6223