Items where Subject is "Engineering > Mechanical engineering > Dynamics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | C | F | G | M | R | S
Number of items at this level: 28.

A

Albertini, Carlo and Cadoni, Ezio and Labibes, Kamel (1997) Precision Measurements of Vehicle Crashworthiness by Means of a Large Hopkinson Bar. Journal de Physique IV, 07. C3 79-84.

Albertini, Carlo and Cadoni, Ezio and Solomos, George (2014) Advances in the Hopkinson bar testing of irradiated/non-irradiated nuclear materials and large specimens. Philosophical Transactions of the Royal Society A, 372 (201301). ISSN 1364-503X

C

Cadoni, Ezio and Amaro, Walter and Dotta, Matteo and Albertini, Carlo and Giorgetti, Paolo (2006) DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In: Structural Concrete in Switzerland. FIB-CH, pp. 35-38.

Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey and Ripamonti, Antonio (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, 59 (2). pp. 101-117.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. In: Failure and damage mechanisms of armour materials, 26 November 2010, Madrid.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, 82. pp. 124-129.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano and Kaufmann, Hanspeter (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, 26. 05004.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, 2. pp. 986-993. ISSN 2452-3216

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, 197. pp. 168-175. ISSN 1877-7058

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Kaufmann, Hanspeter (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.

Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, 414 (3). 360 - 366.

Cadoni, Ezio and Kaufmann, Hanspeter (2012) Opportunities and Challenges of Light-Weight Armour: Failure Mechanisms, Materials, Experiments and Modeling. In: Cadoni, Ezio, (ed.) SUPSI. ISBN 9788875951207

Cadoni, Ezio and di Prisco, Marco (2011) Performance, Protection and Strengthening of Structures under Extreme Loading. Applied Mechanics and Materials, 82 . Trans Tech Publication, p. 900. ISBN 978-3-03785-217-0

Coppola, Luigi and Cadoni, Ezio and Forni, Daniele and Buoso, Alessandra (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, 82. pp. 190-195.

F

Furlan, Ivan and Bianchi, Mikael Andreas and Caminiti, Marco and Montu, Gianluca (2013) An Approach to the Optimal Observer Design with Selectable Bandwidth. In: Proceedings of the 13th international conference of the european society for precision engineering and nanotechnology 13th euspen International Conference, 27.05.2013-31.05.2013, Berlin, Germany.

G

Grazka, Michal and Janiszewski, Jacek and Kruszka, Leopold and Cadoni, Ezio and Forni, Daniele and Riganti, Gianmario (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, 566. pp. 97-103. ISSN 1660-9336

M

Mirone, Giuseppe and Barbagallo, Raffaele and Cadoni, Ezio (2017) Tensile Test of a HSLA Steel at High Strain Rates with Two Different SHTB Facilities. Procedia Engineering, 197. pp. 89-98.

R

Riganti, Gianmario and Cadoni, Ezio (2015) The use of the Split Hopkinson Bar tests to assess the material models for concrete. In: 16th International Symposium for the Interaction of the Effects of Munitions with Structures UNSPECIFIED.

S

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2013) Dynamic Tensile and Compressive Behaviors of Mild Steel at Wide Range of Strain Rates. Journal of Engineering Mechanics ASCE, 139 (9). pp. 1197-1206.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Dynamic compressive behavior of bearing steel. In: Third Asian Conference on Mechanics of Functional Materials and Structures - 2012, 6-8 December 2012, Delhi - India.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2011) Dynamic tensile behavior of multi phase high yield strength steel. Materials & Design, 32 (10). 5091 - 5098.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Mechanical behavior of a structural steel at different rates of loading. In: International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM-2012), January 4-6, 2012 , Bengal Engineering and Science University, Shibpur, Howrah, WB, India.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2012) Mechanical characterization of multi phase steel at different rates of loading. Materials Science Forum, 710. pp. 421-426.

Singh, Nilamber Kumar and Cadoni, Ezio and Singha, Maloy Kumar and Gupta, Narinder Kumar (2014) Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures, 21 (7). pp. 531-537. ISSN 1537-6494

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2013) Dynamic characteristics of Aluminium alloys at wide range of strain rates. Proceedings of the Indian National Science Academy. Part A, Physical Sciences, 79 (4). pp. 587-595. ISSN 0370-0046

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2012) Strain Rate Sensitivity of Die Steel under Compressive Loads. Advanced Materials Research, 585. pp. 412-416.

Singh, Nilamber Kumar and Singha, Maloy Kumar and Cadoni, Ezio and Gupta, Narinder Kumar (2012) Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads. Advanced Materials Research, 548. pp. 169-173.

Spaetig, Philippe and Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In: IEA Workshop on Fusion Materials Modeling IEA Workshop on Fusion Materials Modeling 2011, April 20-22, Lawrence Livermore National Laboratory, April 20-22, 2011, Lawrence Livermore National Laboratory.

This list was generated on Tue Nov 21 09:00:34 2017 CET.