Items where Subject is "Physical sciences > Materials science"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | D | F | G | L | M | N | O | P | R | S | T | V
Number of items at this level: 112.

A

Amaral-Labat, G and Zollfrank, C and Ortona, Alberto and Pusterla, Simone and Pizzi, Antonio and Fierro, Vanessa and Celzard, Alain (2013) Structure and oxidation resistance of micro-cellular Si-SiC foams derived from natural resins. Ceramics International, 39 (2). pp. 1841-1851. ISSN 0272-8842

Annigoni, Eleonora and Virtuani, Alessandro and Caccivio, Mauro and Friesen, Gabi and Chianese, Domenico and Ballif, Christophe (2019) 35 years of photovoltaics: Analysis of the TISO-10-kW solar plant, lessons learnt in safety and performance-Part 2. Progress in Photovoltaics: Research and Applications. ISSN 10627995

B

Badini, Claudio and Fino, Paolo and Ortona, Alberto and Amelio, C (2002) High temperature oxidation of multilayered SiC processed by tape casting and sintering. Journal of the European Ceramic Society, 22 (12). pp. 2071-2079. ISSN 0955-2219

Badini, Claudio and Fino, Paolo and Rosso, I and Ortona, Alberto (2002) High temperature oxidation of SiC/C/SiCf and SiC/BN/SiCf composites. Materials Engineering, 13 (1). pp. 15-32.

Bianchi, Giovanni and Ortona, Alberto and Vodermayer, Albert (2018) Net shape CMC components produced by composite flow moulding, pyrolysis and reactive silicon infiltration. Ceramics International. ISSN 0272-8842

Bouvard, Olivia and Lanini, Matteo and Burnier, Luc and Witte, Reiner and Cuttat, Bernard and Salvadé, Andrea and Schüler, Andreas (2017) Structured transparent low emissivity coatings with high microwave transmission. Structured transparent low emissivity coatings with high microwave transmission.

C

Cosoli, Paolo and Scocchi, Giulio and Pricl, Sabrina and Fermeglia, Maurizio (2008) Many-scale molecular simulation for ABS--MMT nanocomposites: Upgrading of industrial scraps. Microporous and Mesoporous Materials, 107 (1). pp. 169-179. ISSN 1387-1811

D

D'Amico, Giuseppe Claudio and Ortona, Alberto and Biamino, Sara and Fino, Paolo and Badini, Claudio and D'Angelo, Claudio (2014) Oxidation Behavior at 1600°C of Si-SiC-ZrB2 Composites Produced by Si Reactive Infiltration. Advanced Engineering Materials, 16 (2). pp. 176-183. ISSN 1527-2648

D'Angelo, Claudio and Ortona, Alberto and Colombo, Paolo (2013) Influence of the loading direction on the mechanical behavior of ceramic foams and lattices under compression. Acta Materialia, 61 (14). pp. 5525-5534. ISSN 1359-6454

F

Friesen, Thomas and Chianese, Domenico and Realini, Antonella and Friesen, Gabriele and Burà, Enrico and Virtuani, Alessandro and Strepparava, Davide and Meoli, Ronny (2012) TISO 10 kW: 30 Years of Experience with a PV Plant. In: Proc.of the 27th Eu PVSEC Conference 27th Eu PVSEC Conference, 2012, Frankfurt.

G

Galleano, Roberto and Zaaiman, Willem and Virtuani, Alessandro and Pavanello, Diego and Morabito, Paolo and Minuto, Alessandro and Spena, Antonio and Bartocci, Simona and Fucci, Raffaele and Leanza, Guido and Fasanaro, Daniela and Catena, Mario (2013) Intercomparison campaign of spectroradiometers for a correct estimation of solar spectral irradiance: results and potential impact on photovoltaic devices calibration. Progress in Photovoltaics, 22 (11). pp. 1128-1137. ISSN 1099-159X

L

Licciulli, Antonio and De Riccardis, F and Quirini, Angelo and Nannetti, Carlo Alberto and Filacchioni, G and Pilloni, Luciano and Bottinelli, Stefano and Ortona, Alberto and Cammarota, A (1996) Preparation and characterization of SiC/C/SiC composites by hybrid wet/vapour processing. Key Engineering Materials, 127. pp. 279-286. ISSN 1013-9826

M

Mach, FRA and Von Issendorff, Franz and Delgado, Antonio and Ortona, Alberto (2008) Experimental Investigation of the Oxidation Behavior of SiSiC Foams. Ceramic Engineering and Science Proceedings, 29 (7). pp. 299-311. ISSN 1940-6339

Marchionna, Stefano and Virtuani, Alessandro and Acciarri, Maurizio and Isella, Giovanni and von Känel, Hans (2006) Defect imaging of SiGe strain relaxed buffers grown by LEPECVD. Materials Science in Semiconductor Processing, 9 (4). pp. 802-805. ISSN 1369-8001

N

Naikade, Manoj and Ortona, Alberto (2019) Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments. Journal of the European Ceramic Society. ISSN 0955-2219

Nannetti, Carlo Alberto and Borello, A and De Pinto, DA and Carbonetti, Daniela and Licciulli, Antonio and Ortona, Alberto (2006) C fiber reinforced ceramic matrix composites by a combination of CVI, PIP and RB. High Temperature Ceramic Matrix Composites. pp. 368-374.

Nannetti, Carlo Alberto and Ortona, Alberto and Pinto, Dario A and Riccardi, Bruno (2004) Manufacturing SiC-fiber-reinforced SiC matrix composites by improved CVI/slurry infiltration/polymer impregnation and pyrolysis. Journal of the American Ceramic Society, 87 (7). pp. 1205-1209. ISSN 1551-2916

Nannetti, Carlo Alberto and Riccardi, Bruno and Ortona, Alberto and La Barbera, Aurelio and Scafè, E and Vekinis, George (2002) Development of 2D and 3D Hi-Nicalon fibres/SiC matrix composites manufactured by a combined CVI--PIP route. Journal of nuclear materials, 307 (2). pp. 1196-1199. ISSN 0022-3115

O

Ortona, Alberto (2011) Ceramic matrix composites: reaction bonded. Wiley Encyclopedia of Composites.

Ortona, Alberto and Badini, Claudio and Liedtke, Volker and Wilhelmi, Christian and D'Angelo, Claudio and Gaia, Daniele and Fischer, Wolfgang (2013) Hetoroporous heterogeneous ceramics for reusable thermal protection systems. Journal of Materials Research, 28 (17). pp. 2273-2280.

Ortona, Alberto and Barbato, Maurizio and Ferrari, Luca and Gianella, Sandro (2016) Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles. Composite Structures.

Ortona, Alberto and Bianchi, Giovanni and Casalegno, Valentina (2018) SiC foam sandwich structures obtained by Mo-wrap joining. Materials Letters. ISSN 0167-577X

Ortona, Alberto and Bianchi, Giovanni and Gianella, Sandro (2017) Design and additive manufacturing of periodic ceramic architectures. Journal of Ceramic Science and Technology.

Ortona, Alberto and Bianchi, Giovanni and Santoliquido, Oscar and Dimopoulos Eggenschwiler, Panayotis (2017) Additive manufacturing of periodic ceramic substrates for automotive catalyst supports. International Journal of Applied Ceramic Technology. ISSN 1744-7402

Ortona, Alberto and D'Angelo, Claudio and Bianchi, Giovanni (2012) Monitoring sandwich structured SiC ceramics integrity with electrical resistance. NDT & E International, 46. pp. 77-82. ISSN 0963-8695

Ortona, Alberto and D'Angelo, Claudio and Gianella, Sandro and Gaia, Daniele (2012) Cellular ceramics produced by rapid prototyping and replication. Materials Letters, 80. pp. 95-98. ISSN 0167577X

Ortona, Alberto and Donato, A and Filacchioni, G and De Angelis, U and La Barbera, Aurelio and Nannetti, Carlo Alberto (2000) SiC-SiC f CMC manufacturing by hybrid CVI-PIP techniques: process optimisation. Fusion Engineering and Design, 51-52. pp. 159-163. ISSN 0920-3796

Ortona, Alberto and Fend, Thomas and Yoon, Dang-Hyok and Yu, Hyun-Woo and Raju, Kati (2015) Tubular Si-infiltrated SiCf/SiC composites for solar receiver application—Part 1: Fabrication by replica and electrophoretic deposition. Solar Energy Materials and Solar Cells.

Ortona, Alberto and Ferrari, Luca and Rezaei, Ehsan (2015) Electromagnetic properties of periodic carbon architectures at high frequencies. 2015 International Conference on Electromagnetics in Advanced Applications (ICEAA).

Ortona, Alberto and Fino, Debora (2017) Development of a robust and efficient biogas processor for hydrogen production. Part 1: Modelling and simulation. International Journal of Hydrogen Energy.

Ortona, Alberto and Fino, Paolo and Badini, Claudio and D'Angelo, Claudio (2014) Oxidation Behavior at 1600 °C of Si‐SiC‐ZrB2 Composites Produced by Si Reactive Infiltration. Advanced Engineering Materials. ISSN 1527-2648

Ortona, Alberto and Fino, Paolo and D'Angelo, Claudio and Biamino, Sara and D'Amico, Giuseppe Claudio and Gaia, Daniele and Gianella, Sandro (2012) Si-SiC-ZrB2 ceramics by silicon reactive infiltration. Ceramics International, 38 (4). pp. 3243-3250. ISSN 0272-8842

Ortona, Alberto and Holmes, Scott T. and Steiner, Karl V. and Gillespie Jr, John (1991) On-Line Sensing of the Resistance Welding Process for Thermoplastic Composites Using Acoustic Emission. Proceedings of the American Society for Composites. Sixth Technical Conference. Composite Materials, Mechanics and Processing. pp. 174-182.

Ortona, Alberto and Kuzhir, Polina and Paddubskaya, Alesia and Bychanok, Dmitry and Liubimau, Aleksandr and Fierro, Vanessa and Celzard, Alain (2020) 3D-printed, carbon-based, lossy photonic crystals: Is high electrical conductivity the must? Carbon.

Ortona, Alberto and Lagos, Miguel A and Scocchi, Giulio and Barcena, Jorge (2014) Spark plasma sintering of ZrB 2--SiC composites with in-situ reaction bonded silicon carbide. Ceramics International, 40 (1A). pp. 821-826. ISSN 0272-8842

Ortona, Alberto and Papetti, Viola and Panayotis Dimopoulos, Panayotis (2018) Additive manufactured open cell structures: Promising substrates for automotive catalysts. 18. Internationales Stuttgarter Symposium.

Ortona, Alberto and Pelanconi, Marco and Colombo, Paolo (2021) Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis. Journal of the European Ceramic Society.

Ortona, Alberto and Pusterla, Simone and Fino, Paolo and Mach, FRA and Delgado, A and Biamino, Sara (2010) Aging of reticulated Si-SiC foams in porous burners. Advances in Applied Ceramics, 109 (4). pp. 246-251. ISSN 1743-6753

Ortona, Alberto and Pusterla, Simone and Gianella, Sandro (2011) An integrated assembly method of sandwich structured ceramic matrix composites. Journal of the European Ceramic Society, 31 (9). pp. 1821-1826. ISSN 0955-2219

Ortona, Alberto and Rezaei, Ehsan (2014) Modeling the properties of cellular ceramics: from foams to lattices and back to foams. In: Advances in Science and Technology.

Ortona, Alberto and Rezaei, Ehsan and Gianella, Sandro and Haussener, Sophia (2016) Early-stage oxidation behavior at high temperatures of SiSiC cellular architectures in a porous burner. Ceramics International.

Ortona, Alberto and Santoliquido, Oscar and Bianchi, Giovanni (2017) Additive Manufacturing of Complex Ceramic Architectures. International Conference on Additive Manufacturing in Products and Applications.

Ortona, Alberto and Santoliquido, Oscar and Camerota, Francesco and Rosa, Alice (2021) A novel device to simply 3D print bulk green ceramic components by stereolithography employing viscous slurries. Open Ceramics.

Ortona, Alberto and Santoliquido, Oscar and Colombo, Paolo and Sorarù, Gian Domenico (2018) Polymer‐derived SiCN cellular structures from replica of 3D printed lattices. Journal of the American Ceramic Society. ISSN 1551-2916

Ortona, Alberto and Scocchi, Giulio and Grossi, Loris and Bianchi, Giovanni and D'Angelo, Claudio and Leidi, Tiziano and Gilardi, Raffaele (2013) Evaluation of a simple finite element method for the calculation of effective electrical conductivity of compression moulded polymer–graphite composites. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X

Ortona, Alberto and Trimis, Dimosthenis and Gianella, Sandro and Fino, Paolo and Boulet, Emmanuel and Uhlig, Volker and Eder, Robert and Chazelas, Claire and Grämer, Tobias and D'Amico, Giuseppe Claudio (2013) SiSiC Heat Exchangers for Recuperative Gas Burners with Highly Structured Surface Elements. International Journal of Applied Ceramic Technology, 11 (5). ISSN 1744-7402

Ortona, Alberto and Yoon, Dang-Hyok and Fend, Thomas and Feckler, Gereon and Smirnova, Olena (2015) Tubular Si-infiltrated SiC f/SiC composites for solar receiver application--Part 2: Thermal performance analysis and prediction. Solar Energy Materials & Solar Cells, 140. pp. 382-387. ISSN 0927-0248

P

Paraskeva, Vasiliki and Hadjipanayi, Maria and Norton, Matthew and Pravettoni, Mauro and Georghiou, George (2013) Voltage and light bias dependent quantum efficiency measurements of GaInP/GaInAs/Ge triple junction devices. Solar Energy Materials & Solar Cells, 116. pp. 55-60.

Paraskeva, Vasiliki and Lazarou, Constantinos and Hadjipanayi, Maria and Norton, Matthew and Pravettoni, Mauro and Georghiou, George and Heilmann, Martin and Christiansen, Silke (2014) Photoluminescence analysis of coupling effects: The impact of shunt resistance and temperature. Solar Energy Materials & Solar Cells, 130. pp. 170-181. ISSN 0927-0248

Pavese, Matteo and Fino, Paolo and Badini, Claudio and Ortona, Alberto and Marino, Giuliano (2008) HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties. Surface and Coatings Technology, 202 (10). pp. 2059-2067. ISSN 0257-8972

Pavese, Matteo and Fino, Paolo and Ortona, Alberto and Badini, Claudio (2008) Potential of SiC multilayer ceramics for high temperature applications in oxidising environment. Ceramics International, 34 (1). pp. 197-203. ISSN 0272-8842

Pelanconi, Marco and Ortona, Alberto and Al-Ketan, Oraib and Al-Rub, Rashid K- Abu (2019) Additive manufacturing of architected catalytic ceramic substrates based on triply periodic minimal surfaces. Journal of the American Ceramic Society. ISSN 1551-2916

Perego, Claudio and Pesce, Luca and Capelli, Riccardo and George, Subi J. and Pavan, Giovanni M. (2021) Multiscale Molecular Modelling of ATP‐Fueled Supramolecular Polymerisation and Depolymerisation**. ChemSystemsChem, 3 (2). ISSN 2570-4206

Pereira, Simao Pedro and Scocchi, Giulio and Toth, Radovan and Posocco, Paola and Nieto, Daniel R. and Pricl, Sabrina and Fermeglia, Maurizio (2012) Multiscale Modeling of Polymer/Clay Nanocomposites. Journal of Multiscale Modelling, 3 (3). pp. 1-28. ISSN 1756-9737

Popescu, Laura Madalina and Piticescu, Roxana Mioara and Rusti, Cristina Florentina and Maly, Marek and Danani, Andrea and Kintzios, Spiros and Grinan, Maria Teresa Valero (2011) Preparation and characterization of new hybrid nanostructured thin films for biosensors design. Materials Letters, 65 (13). pp. 2032-2035. ISSN 0167-577X

Pravettoni, Mauro and Manni, Loris and Dittmann, Sebastian (2015) LED Floodlight for Spectral Tuning of a Class AAA Large Area Pulsed Solar Simulator. In: EU PVSEC Proceedings 31st European Photovoltaic Solar Energy Conference and Exhibition, 14-18 Sep 2015, Hamburg.

Pravettoni, Mauro and Polo Lopez, Cristina Silvia and Kenny, Robert P. (2016) Impact of the Edges of a Backside Diffusive Reflector on the External Quantum Efficiency of Luminescent Solar Concentrators: Experimental and Computational Approach. American Journal of Engineering and Applied Sciences, 9 (1). pp. 53-63. ISSN 1941-7020 (In Press)

Pravettoni, Mauro and Virtuani, Alessandro and Keller, Kersin and Apolloni, Marco and Muellejans, Harald (2013) Spectral Mismatch Effect to the Open-circuit Voltage in the Indoor, Characterization of Multi-junction Thin-film Photovoltaic Modules. In: Conference Records of the IEEE Photovoltaic Specialists Conference 39th IEEE PVSC, 2013, Tampa.

Pusterla, Simone and Ortona, Alberto and D'Angelo, Claudio and Barbato, Maurizio (2012) The influence of cell morphology on the effective thermal conductivity of reticulated ceramic foams. Journal of Porous Materials, 19 (3). pp. 307-315. ISSN 1380-2224

R

Rezaei, Ehsan and Bianchi, Giovanni and Gianella, Sandro and Ortona, Alberto (2014) On the nonlinear mechanical behavior of macroporous cellular ceramics under bending. Journal of the European Ceramic Society, 34 (10). pp. 2133-2141. ISSN 0955-2219

S

Schenker, Filippo and Blazquez, Victor and Antonietti, Samuel and Zerbi, Stefano and Coppola, Luigi and Bernardi, Chiara and Lurati, Marco and Pozzoni, Maurizio and Corboud, Federico and Ferrari, Domenico and Ambrosi, Christian (2020) SCARTI DI CAVA PER LA PRODUZIONE DI CONGLOMERATI SOSTENIBILI E TECNOLOGICAMENTE INNOVATIVI. Technical Report (Unpublished)

Scocchi, Giulio and Posocco, Paola and Danani, Andrea and Pricl, Sabrina and Fermeglia, Maurizio (2007) To the nanoscale, and beyond!: Multiscale molecular modeling of polymer-clay nanocomposites. Fluid Phase Equilibria, 261 (1-2). pp. 366-374. ISSN 0378-3812

Scocchi, Giulio and Posocco, Paola and Fermeglia, Maurizio and Pricl, Sabrina (2007) Polymer-clay nanocomposites: a multiscale molecular modeling approach. The Journal of Physical Chemistry B, 111 (9). pp. 2143-2151. ISSN 1520-6106

Scocchi, Giulio and Posocco, Paola and Handgraaf, Jan-Willem and Fraaije, Johannes GEM and Fermeglia, Maurizio and Pricl, Sabrina (2009) A complete multiscale modelling approach for polymer--clay nanocomposites. Chemistry-A European Journal, 15 (31). pp. 7586-7592. ISSN 1521-3765

Scocchi, Giulio and Sergi, Danilo and D'Angelo, Claudio and Ortona, Alberto (2011) Wetting and contact-line effects for spherical and cylindrical droplets on graphene layers: A comparative molecular-dynamics investigation. Physical Review E, 84 (6). 061602. ISSN 2470-0053

Sergi, Danilo and D'Angelo, Claudio and Scocchi, Giulio and Ortona, Alberto (2012) Random Packing of Small Blocks: Pressure Effects, Orientational Correlations and Application to Polymer-Based Composites. Particle & Particle Systems Characterization, 29 (1). pp. 24-34. ISSN 1521-4117

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2014) Lattice Boltzmann simulations on the role of channel structure for reactive capillary infiltration. arXiv preprint arXiv:1409.0954.

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2015) Lattice Boltzmann simulations on the role of channel structure for reactive capillary infiltration. Engineering Applications of Computational Fluid Mechanics (ahead-). pp. 1-23.

Sergi, Danilo and Grossi, Loris and Leidi, Tiziano and Ortona, Alberto (2014) Surface growth effects on reactive capillary-driven flow: Lattice Boltzmann investigation. Engineering Applications of Computational Fluid Mechanics, 8 (4). 549 - 561. ISSN 1994-2060

Silverman, Timothy J. and Jahn, Ulrike and Friesen, Gabriele and Pravettoni, Mauro and Apolloni, Marco and Louwen, Atse and van Sark, WGJHM and Schweiger, Markus and Belluardo, Giorgio and Wagner, Jochen and Tetzlaff, Anke and Ingenhoven, P. and Moser, David (2014) Characterisation of Performance of Thin-film Photovoltaic Technologies. Technical Report UNSPECIFIED

Spaggiari, Marco and Santoliquido, Oscar and Bianchi, Giovanni and Ortona, Alberto (2019) Formation of CeO2 coatings on Si–SiC foams by electrophoretic deposition and sintering in air. Ceramics International. ISSN 0272-8842

Szczurek, Anna and Ortona, Alberto and Ferrari, Luca and Rezaei, Ehsan and Medjahdi, Ghouti and Fierro, Vanessa and Bychanok, Dmitry and Kuzhir, Polina and Celzard, Alain (2015) Carbon periodic cellular architectures. Carbon, 88. pp. 70-85.

T

Thota, Bala N. S. and Lou, Xianwen and Bochicchio, Davide and Paffen, Tim F. E. and Joost L. J. van Dongen, Ren P. M. Lafleur and Ehrmann, Svenja and Haag, Rainer and Pavan, Giovanni M. and Palmans, Anja R. A. and Meijer, E. W. (2018) Supramolecular Copolymerization as a Strategy to Control the Stability of Self-Assembled Nanofibers. Angewandte Chemie International Edition, 57 (23). pp. 6843-6847.

Trimis, Dimosthenis and Uhlig, Volker and Eder, Robert and Ortona, Alberto and Pusterla, Simone and Ambrosio, Elisa Paola and Fino, Paolo and Rumeau, Pascal and Chazelas, Claire and Giannella, Sandro (2011) New ceramic heat exchangers with enhanced heat transfer properties for recuperative gas burners. Heat Processing, 9 (2). pp. 183-187. ISSN 1611-616X

V

Virtuani, Alessandro (2006) Film sottili: dalla provetta alla catena di montaggio. Technical Report UNSPECIFIED

Virtuani, Alessandro (2007) Glass and Photovoltaics: two words continuosly moving closer. Technical Report UNSPECIFIED

Virtuani, Alessandro (2004) Optimisation of Cu(In,Ga)Se2 Thin Film Solar Cells and Modules for Low-Irradiance Conditions. PhD thesis, SHAKER VERLAG (Aachen, Germany).

Virtuani, Alessandro (2006) Silicio: futuro e presente del fotovoltaico (Parte 1). Technical Report UNSPECIFIED

Virtuani, Alessandro (2006) Silicio: futuro e presente del fotovoltaico (Parte 2). Technical Report UNSPECIFIED

Virtuani, Alessandro (2007) Vetro e fotovoltaico: due mondi sempre più vicini. Technical Report UNSPECIFIED

Virtuani, Alessandro and Beljean, Pierre and Rigamonti, Giorgio and Friesen, Gabriele and Chianese, Domenico (2012) Fast and accurate method for the performance testing of highly efficient C-Si photovoltaic modules using A 10 Ms single-pulse solar simulator and customized voltage profiles. Measurement Sciuence and Tecnology, 23 (115604). ISSN 0957-0233

Virtuani, Alessandro and Beljean, Pierre and Rigamonti, Giorgio and Friesen, Gabriele and Chianese, Domenico and Pravettoni, Mauro (2012) A fast and accurate method for the performance testing of high-efficiency C-Si PV modules using A 10 Ms single-pulse solar simulator. In: Conference Records of the IEEE Photovoltaic Specialists Conference 38th IEEE PVSC, 2012, Austin.

Virtuani, Alessandro and Domine, Didier and Pravettoni, Mauro and Pavanello, Diego and Bernasocchi, Mauro and Friesen, Gabriele (2011) Spectral Characterization Tools Used at SUPSI for Indoor Performance Measurement of Single and Multi-Junction Photovoltaic Modules. In: Proc.of the 26th Eu PVSEC Conference 26th Eu PVSEC Conference, 2011, Hamburg.

Virtuani, Alessandro and Fanni, Lorenzo (2012) Seasonal power fluctuations of amorphous silicon thin film PV modules: distinguishing between different contributions. Progress in Photovoltaics, 22 (2). pp. 208-217. ISSN 1099-159X

Virtuani, Alessandro and Fanni, Lorenzo and Chianese, Domenico (2010) Seasonal Power Fluctuations of Single Junction Amorphous Silicon Modules. It Is Possible to Distinguish between Spectral Variation and Staebler-Wronski Effect? In: Proc.of the 25th Eu PVSEC Conference 25th Eu PVSEC Conference, 2010, Valencia.

Virtuani, Alessandro and Fanni, Lorenzo and Chianese, Domenico (2011) A detailed analysis of gains and losses of a fully integrated flat roof amorphous silicon photovoltaic Solar plant. Solar Energy, 85 (9). pp. 2360-2373. ISSN 0038-092X

Virtuani, Alessandro and Friesen, Gabriele and Chianese, Domenico and Dozio, Gian Carlo and Pegurion, Matthias and Beljean, Pierre (2010) The MPVT (Multi-Purpose PV Module Tester) Project – A Highly Innovative and Versatile Solar Simulator. In: Proc.of the 25th Eu PVSEC Conference Proc.of the 25th Eu PVSEC Conference, 2010, Valencia.

Virtuani, Alessandro and Friesen, Gabriele and Chianese, Domenico and Dozio, Gian Carlo and Rigamonti, Giorgio and Pegurion, Matthias and Beljean, Pierre (2011) The MPVT (Multi-Purpose PV Module Tester) Project – A Highly Innovative and Versatile Solar Simulator. In: Proc.of the 26th Eu PVSEC Conference 26th Eu PVSEC Conference, 2011, Hamburg.

Virtuani, Alessandro and Galleano, Roberto and Morabito, Paolo and Spena, Antonio and Bartocci, Simona and Fucci, Raffaele and Leanza, Guido and Pavanello, Diego and Zaaiman, Willem and Fasanaro, Daniela and Catena, Mario and Norton, Matthew (2012) Intercomparison of spectroradiometers for solar spectral irradiance measurements. Preliminary results. In: Conference Records of the Concentrated Photovoltaics Specialist Conference Conference Records of the Concentrated Photovoltaics Specialist Conference, 2012, Toledo.

Virtuani, Alessandro and Lotter, Erwin and Powalla, Michael (2004) Improved low-irradiance performance of Cu(In,Ga)Se2 solar modules. In: Proc.of the 19th Eu. PVSEC Conference (Paris 2004), 19th Eu. PVSEC Conference, 2004, Paris.

Virtuani, Alessandro and Lotter, Erwin and Powalla, Michael (2006) Influence of the light source on the low-irradiance performance of Cu(In,Ga)Se2 solar cells. Solar Energy Materials and Solar Cells, 90 (14). pp. 2141-2149.

Virtuani, Alessandro and Lotter, Erwin and Powalla, Michael and Rau, Uwe and Werner, Jürgen H. (2004) Highly resistive Cu(In,Ga)Se2 absorbers for improved low-irradiance performance of thin-film solar cells. Thin Solid Films, 451-45. pp. 160-165.

Virtuani, Alessandro and Lotter, Erwin and Powalla, Michael and Rau, Uwe and Werner, Jürgen H. and Acciarri, Maurizio (2006) Influence of the Cu content on the electronic transport of Cu(In,Ga)Se2 and on the shunting behaviour of Cu(In,Ga)Se2 solar cells. Journal of Applied Physics, 014906 (1). p. 14906.

Virtuani, Alessandro and Marchionna, Stefano and Acciarri, Maurizio and Isella, Giovanni and von Känel, Hans (2006) Electron-Beam-Induced current imaging for the characterization of structural defects in Si1-xGex films grown by LEPECVD. Materials Science in Semiconductor Processing, 9 (4-5). pp. 798-801. ISSN 1369-8001

Virtuani, Alessandro and Meza, Carlos and Chianese, Domenico (2010) Evaluation of Models for the Internal Capacitance of a PV Module for the Design and Simulation of Power Converters. In: Proc.of the 25th Eu PVSEC Conference 25th Eu PVSEC Conference, 2010, Valencia.

Virtuani, Alessandro and Müllejans, Harald and Dunlop, Ewan D. (2010) Comparison of indoor and outdoor performance measurements of recent commercially available solar modules. Progress in Photovoltaics, 19. pp. 11-20. ISSN 1099-159X

Virtuani, Alessandro and Müllejans, Harald and Pavanello, Diego (2008) New Correction Procedure for IV Curves Measured Under Varying Irradiance. In: Proc.of the 23rd Eu PVSEC Conference 23rd Eu PVSEC Conference, 2008, Valencia.

Virtuani, Alessandro and Pavanello, Diego and Friesen, Gabriele (2010) Overview of Temperature Coefficients of Different Thin Film Photovoltaic Technologies. In: Proc.of the 25th Eu PVSEC Conference 25th Eu PVSEC Conference, 2010, Valencia.

Virtuani, Alessandro and Pavanello, Diego and Kenny, Robert P. and Nikolaeva-Dimitrova, Miglena and Dunlop, Ewan D. (2007) Comparison of Indoor and Outdoor Performance Measurements on Cis Thin Film Solar Modules. In: Proc.of the 22nd Eu. PVSEC Conference 22nd Eu. PVSEC Conference, 2007, Milan.

Virtuani, Alessandro and Ponti, Francesco and Müllejans, Harald and Dunlop, Ewan D. (2008) Comparison of indoor and outdoor performance measurements of recent commercially available solar modules. In: Proc.of the 23rd Eu PVSEC Conference 23rd Eu PVSEC Conference, 2008, Valencia.

Virtuani, Alessandro and Pravettoni, Mauro (2011) Impact of a Finite Shunt Resistance on the Dark Spectral Response of an a-Si/µc-Si Thin-film Multi-junction Photovoltaic Device. In: MRS Proceedings MRS Proceedings.

Virtuani, Alessandro and Pravettoni, Mauro and Kenny, Robert P. and Farrell, Daniel J. and Chatten, Amanda J. and Barnham, Keith W. J. (2009) Outdoor Characterization Of High Efficiency Luminescent Solar Concentrators. In: Mater. Res. Soc. Symp. Proc. Volume 1168E Mater. Res. Soc. Symp. Proc., 2009, Warrendale, PA.

Virtuani, Alessandro and Pravettoni, Mauro and Müllejans, Harald (2009) Comparison of Indoor and Outdoor Performance Measurements on Amorphous Silicon and Micromorph (a-Si/µc-Si) Large-Area Thin Film Solar Modules. In: Proc.of the 24th Eu PVSEC Conference 24th Eu PVSEC Conference, 2009, Hamburg.

Virtuani, Alessandro and Pravettoni, Mauro and Müllejans, Harald (2008) Comparison of Indoor and Outdoor Performance Measurements on Micromorph (a-Si/µc-Si) Thin Film Solar Modules. In: Proc.of the 23rd Eu. PVSEC Conference 23rd Eu. PVSEC Conference, 2008, Valencia.

Virtuani, Alessandro and Pravettoni, Mauro and Müllejans, Harald and Kenny, Robert P. and Dunlop, Ewan D. (2009) Spectral Response Measurements of Thin-film Multi-junction PV Modules at the European Solar Test Installation and Spectral Mismatch Calculation. In: Proc.of the 24th Eu PVSEC Conference 24th Eu PVSEC Conference, 2009, Hamburg.

Virtuani, Alessandro and Pravettoni, Mauro and Müllejans, Harald and Kenny, Robert P. and Dunlop, Ewan D. and Barnham, Keith W. J. (2008) Spectral Response Measurements of Multijunction PV Modules at the European Solar Test Installation and Their Usage in Clear Day Outdoor Characterization. In: Proc.of the 23rd Eu PVSEC Conference 23rd Eu PVSEC Conference, 2008, Valencia.

Virtuani, Alessandro and Pravettoni, Mauro and Pravettoni, Fabio and Kenny, Robert P. and Chatten, Amanda J. and Barnham, Keith W. J. (2009) Outdoor Characterisation of Luminescent Solar Concentrators and Their Possible Architectural Integration on a Historically Relevant Site in Milan (Italy). In: Conference Records of the IEEE Photovoltaic Specialists Conference 34th IEEE PVSC, 2009, Philadelphia.

Virtuani, Alessandro and Rigamonti, Giorgio (2013) Modeling the Performance of Amorphous Silicon Photovoltaic Modules for Different Geographical Locations in Europe. In: 28th European PVSEC 28th European PVSEC, 2013, Paris.

Virtuani, Alessandro and Sample, Tonz (2009) Modification to the Standard Reference Environment (SRE) for Nominal Operating Cell Temperature (NOCT) to Account for Building Integration. In: Proc.of the 24th Eu PVSEC Conference 24th Eu PVSEC Conference, 2009, Hamburg.

Virtuani, Alessandro and Skoczek, Artur (2013) Performance Testing of High-Efficient Highly-Capacitive c-Si PV Modules Using Slow-Speed Dark Current-Voltage Characteristics and a Reconstruction Procedure. In: 28th European PVSEC 28th European PVSEC, 2013, Paris.

Virtuani, Alessandro and Skoczek, Artur and Cebecauer, Tomas and Chianese, Domenico (2011) Energy Yield Prediction of Amorphous Silicon Modules Using Full Time Data Series of Irradiance and Temperature for Different Geographical Locations. In: Proc.of the 26th Eu PVSEC Conference Proc.of the 26th Eu PVSEC Conference, 2011, Hamburg.

Virtuani, Alessandro and Zaaiman, Willem and Müllejans, Harald and Vogt, Helmut and Mogensen, Paul Christian and Auvray, Stephane and Dupuy, Didier and Mahe, Ernest (2007) Modified Visual Appearance of Cu(In,Ga)(Se,S)2 Thin Film Solar Modules for Building Integrated Photovoltaics. In: Proc.of the 22nd Eu. PVSEC Conference 22nd Eu. PVSEC Conference, 2007, Milan.

This list was generated on Tue Mar 19 11:16:38 2024 CET.