 | Up a level |
Cadoni, Ezio and Forni, Daniele and Dotta, Matteo and Bellenda, Giovanni and Caccivio, Mauro (2024) Advanced characterisation of photovoltaics for hail resistance. Materials Letters, 354. p. 135371.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2023) Influence of the gauge length on dynamic direct tensile test. Procedia Structural Integrity, 47. pp. 630-635.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2023) UHP(FR)C under impact loading. Procedia Structural Integrity, 47. pp. 331-336.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2023) Combined effects of high strain rate, elevated temperature, and triaxiality on a commercial tungsten alloy. Procedia Structural Integrity, 47. pp. 268-273.
Forni, Daniele and Briccola, Deborah and Dotta, Matteo and Tesio, Nicoletta and Cadoni, Ezio (2023) High and Very-High Strength Steels under harsh conditions of temperature and loading. Procedia Structural Integrity, 47. pp. 348-353.
Kusch, Andrea and Crivelli, Daniele and Diviani, Luca and Dotta, Matteo and Salamina, Simone and Berto, Filippo (2023) Influence of pre‐strain and bake hardening on the static and fatigue strength of a DP600 steel sheet. Fatigue & Fracture of Engineering Materials & Structures. ISSN 8756-758X
Cadoni, Ezio and Briccola, Deborah and Dotta, Matteo and Forni, Daniele (2022) Dynamic Behaviour of Two UHPC Matrixes in Direct Tension. ACI Symposium Publication, 355. pp. 11-18.
Cadoni, Ezio and Briccola, Deborah and Dotta, Matteo and Forni, Daniele (2022) Combined effect of elevated temperature and high strain rates on S690QL high strength steel. Journal of Constructional Steel Research, 199. p. 107519.
Peroni, Marco and Tsionis, George and Solomos, George and Cadoni, Ezio and Knobloch, Markus and Fontana, Mario and Forni, Daniele and Dotta, Matteo (2022) SUSHI - Steel Under Severe High Impact. Technical Report Publications Office of the European Union , Luxembourg (Luxembourg).
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2021) Effects of elevated temperature on a tungsten alloy at high strain-rate. EPJ Web Conf., 250. ISSN 2100-014X
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2021) Experimental investigation on the response of UHP(FR)C at high stress-rates under compression. EPJ Web Conf., 250.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2021) Modern high strength steels under high strain-rate regimes. EPJ Web Conf., 250.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2020) High strain-rate behaviour of a Tungsten alloy. Procedia Structural Integrity, 28. 964 - 970.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario (2020) Dynamic response of UHPFRCs in direct-shear tests. Procedia Structural Integrity, 28. 933 - 942.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2019) Dynamic Behaviour of UHPFRC Under High Strain-Rate. In: Modern Developments in Performance of Structures Under Extreme Loading Proceedings of PROTECT 2019, September 16-17, 2019, Whistler, BC, Canada.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., 183. 02005.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo (2017) Dynamic behaviour of UHPC in compression by means of 3D-Modified Hopkinson Bar. In: Proceedings of 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017) 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), 29.11.2017-01.12.2017, Melbourne.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2017) Analysis of the Materials Behaviour at High Strain-Rate in Support of Impact Resistant Structural Design. In: 7th International Conference on Advances in Experimental Structural Engineering, 06.09.2017-08.09.2017, Pavia.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, 197. pp. 168-175. ISSN 1877-7058
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Kaufmann, Hanspeter (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, 2. pp. 986-993. ISSN 2452-3216
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2016) Effect of the high temperature on the high strain rate behaviour of an austenitic stainless steel. In: 1st International Conference on Impact Loading of Structures and Materials, 22.05.2016-26.05.2016, Torino, Italy.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2016) Tensile behaviour of reinforcing steels at high strain rate and high temperature. Key Engineering Materials, 711. pp. 791-798. ISSN 1013-9826
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Kaufmann, Hanspeter (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Albertini, Carlo (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In: EPJ Web of Conferences DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 07.09.2015-11.09.2015, Lugano, Switzerland.
Latella, Claudia and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Cadoni, Ezio (2015) Influence of strain rate on the mechanical behaviour in tension of bovine cortical bone. EPJ Web of Conferences, 94. 03001. ISSN 2101-6275
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2015) Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate. EPJ Web of Conferences, 94. 01022. ISSN 2101-6275
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2015) High strain rate behaviour in tension of steel B500A reinforcing bar. Materials and Structures, 48 (6). pp. 1803-1813. ISSN 1359-5997
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta and Albertini, Carlo (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, 49 (8). pp. 657-666.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Riganti, Gianmario and Tesio, Nicoletta (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. In: UNSPECIFIED, 22-24 April, 2013, Tel Aviv.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano and Kaufmann, Hanspeter (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, 26. 05004.
Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, 26. 01021.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spaetig, Philippe (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, 414 (3). 360 - 366.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, 82. pp. 124-129.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Tesio, Nicoletta (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, 82. pp. 86-91.
Cadoni, Ezio and Bragov, Anatoly M. and Dotta, Matteo and Forni, Daniele and Konstantinov, Alexander and Lomunov, Andrey and Ripamonti, Antonio (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, 59 (2). pp. 101-117.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Spätig, Philippe (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. In: 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications and 1st International Conference on Fusion Energy Materials Science, Rosemberg.
Spaetig, Philippe and Cadoni, Ezio and Dotta, Matteo and Forni, Daniele (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In: IEA Workshop on Fusion Materials Modeling IEA Workshop on Fusion Materials Modeling 2011, April 20-22, Lawrence Livermore National Laboratory, April 20-22, 2011, Lawrence Livermore National Laboratory.
Cadoni, Ezio and Antonietti, Samuel and Dotta, Matteo and Forni, Daniele (2011) Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, 59 (3). pp. 197-210.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Caverzan, Alessio and di Prisco, Marco (2010) Advanced cementitious composites in the design and construction of safe tunnels. In: Structural Concrete in Switzerland. FIB-CH, pp. 12-15.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Asprone, Domenico and Prota, Andrea and Manfredi, Gaetano (2010) Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In: Structural Concrete in Switzerland. FIB-CH, pp. 28-31.
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Bianchi, Stefano (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. In: Failure and damage mechanisms of armour materials, 26 November 2010, Madrid.
Cadoni, Ezio and Asprone, Domenico and Dotta, Matteo and Forni, Daniele and Prota, Andrea and Manfredi, Gaetano (2009) Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In: Structures under extreme loading. National Defence Academy - Japan.
Cadoni, Ezio and Albertini, Carlo and Dotta, Matteo and Forni, Daniele and Giorgetti, Paolo and Riganti, Gianmario (2009) Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In: Rock fragmentation by blasting. Taylor & Francis Group, Granada, pp. 35-41. ISBN 978-0-415-48296-7
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Meda, Alberto and Plizzari, Giovanni A. (2009) Rate Effects of High Performance Fibre Reinforced Cementitius Composite under tensile loading. In: Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, pp. 809-815. ISBN 978-2-7598-0472-6
Cadoni, Ezio and Dotta, Matteo and Forni, Daniele and Albertini, Carlo and D'Aiuto, Fabio and Federici, Claudio and Maggi, Stefano (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In: Impact Loading of Lightweight Structures Impact Loading of Lightweight Structures, 17-19 June 2008, Trondheim, Norway.
Cadoni, Ezio and Dotta, Matteo and Meda, Alberto and Plizzari, Giovanni A. (2007) Analysis of Fiber Reinforced Concrete under impact loading. In: Performance, protection & strengthening of structures under extreme loading. UBC. ISBN 9780888658166
Cadoni, Ezio and Dotta, Matteo and Meda, Alberto and Plizzari, Giovanni A. (2007) Behaviour of polypropylene Fibre Reinforced Concrete under static and impact tensile loading. In: Concrete under severe conditions. Actes des journées scientifiques du LCPC, Parigi, pp. 1267-1274.
Cadoni, Ezio and Amaro, Walter and Dotta, Matteo and Albertini, Carlo and Giorgetti, Paolo (2006) DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In: Structural Concrete in Switzerland. FIB-CH, pp. 35-38.